I'm on a connection which typically runs less than 150kbps and remote X operation is tolerable. Starting an application takes 10 seconds rather than the normal 1 second, but once running the graphics updates are less than half second intervals.
This is using a normal telnet session. No secure shells or VNC. From my experience, VNC is quite a bit slower than X. Sorry I can't suggest a remedy. Keith Tang ----- Original Message ----- From: "Scharf Yuval" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 17, 2003 3:48 PM Subject: [XFree86] Using X remotely > Hello, > > At home I have an ADSL connection (750 kbps / 96kbps) > My university has a very good connection. > > If I try to use a graphical application remotely it runs very slow. > It takes dozens of seconds to start and everything take lots of time. > > Can I expect to get a reasonable graphical connection in this setting? > > Can I do something (install something or change the configuration) in > either of the sides to improve the situation? > > Thanks, > Yuval Scharf > > > > > > > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
