According to the PDF on ADI's web site, this should be:
HorizSync 30 - 96
VertRefresh 50 - 160
That should be capable of 1600x1200 @ 75Hz
Mark.
http://www.adi.com.tw/Menu%20Download%20c.htm
On 4 Dec 2003, Jeff wrote:
> Thanks, I have an ADI Microscan M900 so it looks like I have picked the
> wrong monitor.
>
> Does anyone have the correct config for an M900 - it's not listed in the
> X monitor list.
>
> thanks again.
> Jeff
>
>
> On Thu, 2003-12-04 at 06:00, Mark Vojkovich wrote:
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Monitor Vendor"
> > ModelName "ADI MicroScan 17X+"
> > HorizSync 24.6 - 60.0
> > VertRefresh 50.0 - 120.0
> > Option "dpms"
> > EndSection
> >
> > If those specs are correct, that monitor cannot do 1600x1200.
> > If it can do 1600x1200 then those specs are incorrect.
> >
> >
> > Mark.
> >
> >
> > On 4 Dec 2003, Jeff wrote:
> >
> > > Hi Guys,
> > >
> > > Ive got a geforce 4ti 4200 AGP8x and cant get the resolution above
> > > 1280x960. I'm running the latest nvidia drivers - are there any problems
> > > with them?!
> > >
> > > my config is attached.I have even tried commenting out all other
> > > resolutions apart from 1600x1200 (the res i want) with no luck.
> > >
> > > I know both the monitor and gfx card support 1600x1200 - it works under
> > > windoze
> > >
> > > all help appreciated
> > > Jeff
> > >
> >
>
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
