If you haven't already done so, try running "xvidtune". It
came with XFree86.
Mark.
On Sat, 17 Jan 2004, [iso-8859-1] M�ghazi Fabien wrote:
> Hi all,
>
> I posted a message a while ago about modelines for X in order to use it with
> an arcade monitor running at 258Khz Horizontal Frequency. I made a cable to
> connect the monitor to a PC and did some test, but the voltage output of the
> vga card is not high enough for the arcade monitor. So, I tried to test some
> modelines on my NEC Multisync monitor, and after a while I could get
> something displayed without frequency problem. I made my tests using knoppix.
> Here's my modeline :
>
> Modeline "512x384" 15.38 512 544 600 632 384 392 396 404 -HSync +VSync
>
> I don't know what to change in my modeline in order to display properly
>
> Here's some pics displaying the kde desktop, and you can see the display
> problem.
>
> http://www.amigrave.com/25khz/25Khz_on_Nec_01.jpg
> http://www.amigrave.com/25khz/25Khz_on_Nec_02.jpg
> http://www.amigrave.com/25khz/25Khz_on_Nec_03.jpg
> http://www.amigrave.com/25khz/25Khz_on_Nec_04.jpg
>
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
