On Tue, 6 Feb 2007 16:34:08 -0600 Nate Bargmann <[EMAIL PROTECTED]> wrote:
> * Joop Stakenborg <[EMAIL PROTECTED]> [2007 Feb 06 02:54 -0600]: > > > I have just uploaded 1.5 to unstable ;-) > > Okay, just updated and have 1.5 installed now. No real change. I see > the CAT icon flash on the radio once when the Preferences dialog is > closed, but other than that, nothing. When I do a Hamlib trace it > scrolls up the screen, but the file now only captures the following: > > rig:rig_init called > ft920_init called > rig:rig_open called > ft920_open called > ft920_open: write_delay = 50 msec > ft920_open: post_write_delay = 5 msec > ft920_get_vfo called > ft920_get_update_data called > ft920_get_update_data: read pacing = 1 > TX 5 bytes > 0000 00 00 00 01 0e ..... > ft920_send_static_cmd called > TX 5 bytes > 0000 00 00 00 01 fa ..... > RX 8 bytes > 0000 00 20 10 00 00 00 08 00 . ...... > ft920_get_update_data: read 8 bytes > ft920_get_vfo: vfo status_0 = 0x00 > ft920_get_vfo: vfo status_1 = 0x20 > ft920_get_vfo: set vfo = 0x01 > rig:rig_close called > ft920_close called > rig:rig_cleanup called > ft920_cleanup called > > > It looks to me that when the Hamlib trace closes, it closes the rig > again, but nothing shows on the display. > That's right. In order to stop tracing I need to close the rig and open it again with another debug level. It can't be done while the rig is open. > Interestingly, with XLog open and setup for Hamlib, opening gMFSK > doesn't cause any error and gMFSK successfully uses Hamlib to talk to > my FT-920. > > > Did you try setting the polling time to a large value? > > You can also disable polling and use ctrl+k to get rig info. > > See what that gives... > > I tried 1500, 1000, 500, and no difference. > Okay, next thing I can think of is that set_conf doesn't work. I have never checked it on my rig. I will test it next week, will set my rig to some other baud rate and see if I can talk to it with "serial_speed=some_value" in the preferences dialog. That should be a good test. > 73, de Nate >> > > -- > Wireless | Amateur Radio Station N0NB | Successfully Microsoft > Amateur radio exams; ham radio; Linux info @ | free since January 1998. > http://www.qsl.net/n0nb/ | "Debian, the choice of > My Kawasaki KZ-650 SR @ | a GNU generation!" > http://www.networksplus.net/n0nb/ | http://www.debian.org > Thanks so far, Regards, Joop PG4I _______________________________________________ Xlog-discussion mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/xlog-discussion
