Still trying... on fresh cold boots the last two mornings, "ps -A" shows
no cwdaemon running. (Everybody probably knows this, but I had to try it
anyway: starting Xlog does not start cwdaemon.) I started cwdaemon with
"sudo /usr/sbin ./cwdaemon". Another "ps -A" then shows it running.
Xlog's keyer continues not to function.
Below is my /etc/init.d/cwdaemon. Doesn't this specify what's set to run
at boot? It appears to run /etc/default/cwdaemon (although no changes
I've made there, like SPEED, seem to have any effect) and to start
/usr/sbin/cwdaemon. My parport0 is recognized and lp is not loaded. As
previously reported, /usr/share/cwdaemon/cwtest produces audible output
only at the "switch to soundcard" point.
Anyone see anything wrong here? Can anyone confirm that it's like theirs?
#! /bin/sh
### BEGIN INIT INFO
# Provides: cwdaemon
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: A Morse daemon.
### END INIT INFO
#
# Author of this script: Ladislav Vaiz <[email protected]>
#
# Version: @(#)cwdaemon 1.0 03-Jul-2004 [email protected]
#
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/cwdaemon
NAME=cwdaemon
DESC="Morse daemon"
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
OPTS=""
# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0
# Exit if it says no start
grep -q '^START_CWDAEMON=yes' /etc/default/$NAME || exit 0
# Read config file if it is present.
if [ -r /etc/default/$NAME ]
then
. /etc/default/$NAME
test -n "$DEVICE" && OPTS="$OPTS -d $DEVICE"
test -n "$UDPPORT" && OPTS="$OPTS -p $UDPPORT"
test -n "$PRIORITY" && OPTS="$OPTS -P $PRIORITY"
test -n "$SPEED" && OPTS="$OPTS -s $SPEED"
test -n "$PTTDELAY" && OPTS="$OPTS -t $PTTDELAY"
test -n "$VOLUME" && OPTS="$OPTS -v $VOLUME"
test -n "$WEIGHT" && OPTS="$OPTS -w $WEIGHT"
test -n "$SDEVICE" && OPTS="$OPTS -x $SDEVICE"
fi
case "$1" in
start)
echo "$DEVICE" | grep -q 'parport'
if [ $? = 0 ]; then
lsmod|grep -q '\<lp\>'
if [ $? = 0 ]; then
echo "Removing module lp"
rmmod lp
fi
fi
echo -n "Starting $DESC: $NAME"
start-stop-daemon --start --quiet --exec $DAEMON -- $OPTS
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
start-stop-daemon --stop --quiet --exec $DAEMON
echo "."
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
start-stop-daemon --stop --quiet --exec $DAEMON
sleep 1
start-stop-daemon --start --quiet --exec $DAEMON -- $OPTS
echo "."
;;
status)
/bin/ps xa|grep "$DAEMON" | grep -v "grep"
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0
-- John K3GHH
_______________________________________________
Xlog-discussion mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/xlog-discussion
