IMHO You should set=20 smtp-timeout to (endless + 1)/2=20 Set IMAP processing speed to sqrt((50 msg's + 1)=B2).
I hope this will help. Frederik (ROTFL) -----Oorspronkelijk bericht----- Van: Bob Hugel [mailto:[EMAIL PROTECTED]]=20 Verzonden: donderdag 19 september 2002 17:10 Aan: [EMAIL PROTECTED] Onderwerp: [xmail] Keel hard point and speed brake questions.. Hi, I have been working on various parts of my V, and have come across what seems to me like a conflict. My Velocity is a FBF & FBW Std. Elite RG. The factory did not install = the keel or speedbrake. Here is what I have done: -Cut out and installed the Speed brake -Installed 3 out of "5" 1/4" wood hardpoints in the keel -Installed 2 = 1/4 aluminum hard points at 51 1/2" forward of the gear bulk head (which = places them on top of the speed brake -Installed 5 bid on both sides of the = keel for the angles attachment points just above the 1/4 aluminum = hardpoints. The problem is: 1) According to the manual, there should be 5 wood hardpoints installed = in the keel along with a number of access holes. The manual goes on to = say that two of the 1/4" wood hardpoints should be installed 51 1/2" = forward of the gear bulkhead. This is directly in the same place as where the 1/4 aluminum angles need to attach to the keel. 2) There is also reference in the manual to install some access holes = in the same region as the 1/4" alumunm hard points and in my kit with the FBF, there is already markings on the keel here for what looks like the = location for these access holes. The question is: Is it me, or am I not the only person who is confused about this? Thanks, Bob - To unsubscribe from this list: send the line "unsubscribe xmail" in the = body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
