>-----Message d'origine----- >De : [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] la part de Brian Long >Envoy=E9 : mercredi 14 mars 2007 16:53 >=C0 : [email protected] >Objet : [xmail] Re: Help Troubleshooting New Installation, having >difficulties getting SMTP to work > > >Yes, the only mail that will be generated here will need to be=20 >delivered to >the Exchange server.=20 > >I thought it would be that simple too, but could not get it to=20 >work the last >time I tried it. > >I just went in and set the DefaultSMTPGateway to the IP address of our >Exchange server, per your suggestion. I rebooted the server,=20 >then attempted >sending mail again and: > >[PeekTime] 1173887026 : Wed, 14 Mar 2007 10:43:46 -0500 ><< >ErrCode =3D -232 >ErrString =3D Error connecting to remote address >SMAIL SMTP-Send MX =3D "w.x.y.z" SMTP =3D=20 >"hostname.test.stuff.oldcompany.com" >From =3D "[EMAIL PROTECTED]" To =3D >"[EMAIL PROTECTED]" Failed ! >SMTP-Error =3D "417 Temporary delivery error" >SMTP-Server =3D "w.x.y.z" >>> > >So I'm thinking I've got some firewall and/or routing issues going on >here.... >
Yes seems somethink is blocking the transaction. - First verify that, on you Exchange server itself you allowed incoming connexions on the smtp connector. - Second, from the xmail server, try a telnet session directed to the exchange ip on port 25, and see if you have at least a banner after connexion.Try from the Exchange server itself to 127.0.0.1 and to = exchange normal IP (not exactly the same even if on the exchange itself) to see = if the block is generated on the exchange. - If you get nothing at this time, seems somethink block you in the = 'route' to the exchange server.=20 >From behind any firewall one at a time on the 'route' from the exchange = to the xmail (in that order) redoo the telnet test. At each test, if the telnet session seems to begin, try to manually = send a mail to a exchange know mailbox (yours for example) with this sample = list of commands to confirm all is ok from connexion to final delivery : EHLO hostname.test.stuff.oldcompany.com MAIL FROM: <[EMAIL PROTECTED]> RCPT TO: <youemailaddressintheexchange> DATA This is a minimal test . QUIT If all is accepted, when go behind the next possible blocker (firewall, gateway, filter, ...) and redoo the test. Doing so, you will find quickly where is the problem Francis - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
