hello, I made dmesg output from ssh connected from another host. here what modprobe -a radeon tells: [ 453.397377] [drm] Initialized drm 1.1.0 20060810 [ 453.493254] [drm] radeon defaulting to kernel modesetting. [ 453.493260] [drm] radeon kernel modesetting enabled. [ 453.493330] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 453.493338] radeon 0000:00:01.0: setting latency timer to 64 [ 453.502985] [drm] initializing kernel modesetting (PALM 0x1002:0x9802). [ 453.503098] [drm] register mmio base: 0xFE000000 [ 453.503101] [drm] register mmio size: 262144 [ 453.503354] ATOM BIOS: AMD [ 453.503408] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 453.503413] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF [ 453.503591] [drm] Detected VRAM RAM=384M, BAR=256M [ 453.503598] [drm] RAM width 16bits DDR [ 453.503786] [TTM] Zone kernel: Available graphics memory: 820394 kiB. [ 453.503797] [TTM] Initializing pool allocator. [ 453.503855] [drm] radeon: 384M of VRAM memory ready [ 453.503863] [drm] radeon: 512M of GTT memory ready. [ 453.503915] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 453.503922] [drm] Driver supports precise vblank timestamp query. [ 453.504002] radeon 0000:00:01.0: irq 41 for MSI/MSI-X [ 453.504015] radeon 0000:00:01.0: radeon: using MSI. [ 453.504079] [drm] radeon: irq initialized. [ 453.504090] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 453.506960] [drm] Loading PALM Microcode [ 453.518644] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin" [ 453.518717] [drm:evergreen_startup] *ERROR* Failed to load firmware! [ 453.518760] radeon 0000:00:01.0: disabling GPU acceleration [ 453.519866] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary [ 453.519909] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary [ 453.546855] [drm] Radeon Display Connectors [ 453.546861] [drm] Connector 0: [ 453.546864] [drm] HDMI-A [ 453.546867] [drm] HPD2 [ 453.546872] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 453.546875] [drm] Encoders: [ 453.546878] [drm] DFP1: INTERNAL_UNIPHY [ 453.546882] [drm] Connector 1: [ 453.546884] [drm] VGA [ 453.546888] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 453.546891] [drm] Encoders: [ 453.546894] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 453.602928] [drm] Internal thermal controller without fan control [ 453.603181] [drm] radeon: power management initialized [ 453.676637] [drm] fb mappable at 0xC0040000 [ 453.676640] [drm] vram apper at 0xC0000000 [ 453.676651] [drm] size 14745600 [ 453.676654] [drm] fb depth is 24 [ 453.676656] [drm] pitch is 10240 [ 453.676896] fb0: radeondrmfb frame buffer device [ 453.676899] drm: registered panic notifier [ 453.676909] [drm] Initialized radeon 2.8.0 20080528 for 0000:00:01.0 on minor 0
On 10/13/14, Michal Suchanek <[email protected]> wrote: > Hello, > > On 13 October 2014 11:37, basteon <[email protected]> wrote: >> hello, >> I use 2.3.3 vesa xorg driver. >> But with radeon kernel driver I got black screen and nothing more. >> Just after I make modprobe -av radeon >> I use GIGABYTE GA-E350N board with AMD Radeon HD 6310. > > Can you connect over SSH or serial console and collect the kernel > messages after you insert the radeon module? > > The onboard 6310 card should work except it's hell slow. I used to run > a system with one some years ago. > > What connection do you use to connect the display? Some connections > may not be able to use full resolution. Can you try using fbset or > xrandr to switch to lower resolution once the module is inserted? > > Thanks > > Michal > _______________________________________________ [email protected]: X.Org development Archives: http://lists.x.org/archives/xorg-devel Info: http://lists.x.org/mailman/listinfo/xorg-devel
