And after I load the firmware, I got this. And anyway black screen. [ 208.761365] [drm] Initialized drm 1.1.0 20060810 [ 208.858346] [drm] radeon defaulting to kernel modesetting. [ 208.858352] [drm] radeon kernel modesetting enabled. [ 208.858423] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 208.858431] radeon 0000:00:01.0: setting latency timer to 64 [ 208.867813] [drm] initializing kernel modesetting (PALM 0x1002:0x9802). [ 208.867907] [drm] register mmio base: 0xFE000000 [ 208.867910] [drm] register mmio size: 262144 [ 208.868214] ATOM BIOS: AMD [ 208.868265] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 208.868271] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF [ 208.868446] [drm] Detected VRAM RAM=384M, BAR=256M [ 208.868453] [drm] RAM width 16bits DDR [ 208.868865] [TTM] Zone kernel: Available graphics memory: 820394 kiB. [ 208.868876] [TTM] Initializing pool allocator. [ 208.868938] [drm] radeon: 384M of VRAM memory ready [ 208.868988] [drm] radeon: 512M of GTT memory ready. [ 208.869047] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 208.869054] [drm] Driver supports precise vblank timestamp query. [ 208.869131] radeon 0000:00:01.0: irq 40 for MSI/MSI-X [ 208.869145] radeon 0000:00:01.0: radeon: using MSI. [ 208.869210] [drm] radeon: irq initialized. [ 208.869220] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 208.873133] [drm] Loading PALM Microcode [ 208.905519] radeon 0000:00:01.0: WB enabled [ 208.922151] [drm] ring test succeeded in 1 usecs [ 208.922326] [drm] radeon: ib pool ready. [ 208.922445] [drm] ib test succeeded in 0 usecs [ 208.953333] [drm] Radeon Display Connectors [ 208.953339] [drm] Connector 0: [ 208.953342] [drm] HDMI-A [ 208.953345] [drm] HPD2 [ 208.953349] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 208.953353] [drm] Encoders: [ 208.953356] [drm] DFP1: INTERNAL_UNIPHY [ 208.953359] [drm] Connector 1: [ 208.953362] [drm] VGA [ 208.953366] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 208.953369] [drm] Encoders: [ 208.953371] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 209.009294] [drm] Internal thermal controller without fan control [ 209.009542] [drm] radeon: power management initialized [ 209.090148] [drm] fb mappable at 0xC0141000 [ 209.090152] [drm] vram apper at 0xC0000000 [ 209.090155] [drm] size 14745600 [ 209.090157] [drm] fb depth is 24 [ 209.090160] [drm] pitch is 10240 [ 209.090416] fb0: radeondrmfb frame buffer device [ 209.090419] drm: registered panic notifier [ 209.090429] [drm] Initialized radeon 2.8.0 20080528 for 0000:00:01.0 on minor 0
On 10/18/14, basteon <[email protected]> wrote: > hello, > I made dmesg output from ssh connected from another host. > here what modprobe -a radeon tells: > [ 453.397377] [drm] Initialized drm 1.1.0 20060810 > [ 453.493254] [drm] radeon defaulting to kernel modesetting. > [ 453.493260] [drm] radeon kernel modesetting enabled. > [ 453.493330] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 453.493338] radeon 0000:00:01.0: setting latency timer to 64 > [ 453.502985] [drm] initializing kernel modesetting (PALM 0x1002:0x9802). > [ 453.503098] [drm] register mmio base: 0xFE000000 > [ 453.503101] [drm] register mmio size: 262144 > [ 453.503354] ATOM BIOS: AMD > [ 453.503408] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - > 0x0000000017FFFFFF (384M used) > [ 453.503413] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - > 0x0000000037FFFFFF > [ 453.503591] [drm] Detected VRAM RAM=384M, BAR=256M > [ 453.503598] [drm] RAM width 16bits DDR > [ 453.503786] [TTM] Zone kernel: Available graphics memory: 820394 kiB. > [ 453.503797] [TTM] Initializing pool allocator. > [ 453.503855] [drm] radeon: 384M of VRAM memory ready > [ 453.503863] [drm] radeon: 512M of GTT memory ready. > [ 453.503915] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 453.503922] [drm] Driver supports precise vblank timestamp query. > [ 453.504002] radeon 0000:00:01.0: irq 41 for MSI/MSI-X > [ 453.504015] radeon 0000:00:01.0: radeon: using MSI. > [ 453.504079] [drm] radeon: irq initialized. > [ 453.504090] [drm] GART: num cpu pages 131072, num gpu pages 131072 > [ 453.506960] [drm] Loading PALM Microcode > [ 453.518644] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin" > [ 453.518717] [drm:evergreen_startup] *ERROR* Failed to load firmware! > [ 453.518760] radeon 0000:00:01.0: disabling GPU acceleration > [ 453.519866] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary > [ 453.519909] radeon 0000:00:01.0: ffff88001cf0f800 unpin not necessary > [ 453.546855] [drm] Radeon Display Connectors > [ 453.546861] [drm] Connector 0: > [ 453.546864] [drm] HDMI-A > [ 453.546867] [drm] HPD2 > [ 453.546872] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 > 0x644c 0x644c > [ 453.546875] [drm] Encoders: > [ 453.546878] [drm] DFP1: INTERNAL_UNIPHY > [ 453.546882] [drm] Connector 1: > [ 453.546884] [drm] VGA > [ 453.546888] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 > 0x64e4 0x64e4 > [ 453.546891] [drm] Encoders: > [ 453.546894] [drm] CRT1: INTERNAL_KLDSCP_DAC1 > [ 453.602928] [drm] Internal thermal controller without fan control > [ 453.603181] [drm] radeon: power management initialized > [ 453.676637] [drm] fb mappable at 0xC0040000 > [ 453.676640] [drm] vram apper at 0xC0000000 > [ 453.676651] [drm] size 14745600 > [ 453.676654] [drm] fb depth is 24 > [ 453.676656] [drm] pitch is 10240 > [ 453.676896] fb0: radeondrmfb frame buffer device > [ 453.676899] drm: registered panic notifier > [ 453.676909] [drm] Initialized radeon 2.8.0 20080528 for > 0000:00:01.0 on minor 0 > > > On 10/13/14, Michal Suchanek <[email protected]> wrote: >> Hello, >> >> On 13 October 2014 11:37, basteon <[email protected]> wrote: >>> hello, >>> I use 2.3.3 vesa xorg driver. >>> But with radeon kernel driver I got black screen and nothing more. >>> Just after I make modprobe -av radeon >>> I use GIGABYTE GA-E350N board with AMD Radeon HD 6310. >> >> Can you connect over SSH or serial console and collect the kernel >> messages after you insert the radeon module? >> >> The onboard 6310 card should work except it's hell slow. I used to run >> a system with one some years ago. >> >> What connection do you use to connect the display? Some connections >> may not be able to use full resolution. Can you try using fbset or >> xrandr to switch to lower resolution once the module is inserted? >> >> Thanks >> >> Michal >> > _______________________________________________ [email protected]: X.Org development Archives: http://lists.x.org/archives/xorg-devel Info: http://lists.x.org/mailman/listinfo/xorg-devel
