Hallo! I forgot ...
The :0.0 screen uses VGA-0, :0.1 uses LVDS and is completely blank (black screen, just the backlight is on). When I change to text-mode (VT1), the LVDS is still blank. Even when I disable the 2nd screen in xorg.conf and restart the server, LVDS does not show any image. In order to have an image on LVDS again, I have to reboot the machine. Saluti! Ludwig Ludwig Meyerhoff wrote: > Hallo! > > It almost works now. > I really do get two screens :0.0 and :0.1 - I can start a 2nd WM on :0.1 > and xrandr really knows only about LVDS. > > BUT the image on the LVDS is completely blank. > > My Xorg.0.log ist here: > http://paste.debian.net/14304/ > > The config is unchanged but for the ConnectorTable (for which I did not > find any explaination yet) option. > > > Saluti! > > Ludwig > > Alex Deucher wrote: >> On Fri, Aug 8, 2008 at 6:53 AM, Ludwig Meyerhoff <[EMAIL PROTECTED]> wrote: >>> Hallo! >>> >>> I am trying to (re-) setup Zaphod-mode one more time. >>> After I found the device-sctions had the same identifier, I am back to >>> the original problem: LVDS is off, image only on the 2nd head. >>> >>> There is a panel connected at the LVDS port, and there is one at the >>> VGA-0 port. The notebook only has one more S-Video connector. >>> >>> The setup is as follows: >>> (==) ServerLayout "Default Layout" >>> (**) |-->Screen "Default Screen" (0) >>> (**) | |-->Monitor "Generic Monitor 0" >>> (**) | |-->Device "ATI Technologies Inc Radeon RV200 LX [Mobility FireGL >>> 7800 M7] 0" >>> (**) |-->Screen "External Screen" (1) >>> (**) | |-->Monitor "Generic Monitor 1" >>> (**) | |-->Device "ATI Technologies Inc Radeon RV200 LX [Mobility FireGL >>> 7800 M7] 1" >>> >> <snip> >> >>> (II) RADEON(0): Port0: >>> Monitor -- AUTO >>> Connector -- DVI-D >>> DAC Type -- None >>> TMDS Type -- Internal >>> DDC Type -- 0x64 >> this instance of the driver is getting the DVI port. >> >> >>> (II) RADEON(1): Port0: >>> Monitor -- AUTO >>> Connector -- VGA >>> DAC Type -- Primary >>> TMDS Type -- None >>> DDC Type -- 0x60 >> >> >> and this instance is getting VGA. >> >>> And I do not get a second screen: >>> [EMAIL PROTECTED]:~$ DISPLAY=":0.1" icewm-gnome >>> IceWM: using /home/ludwig/.icewm for private configuration files >>> IceWM: Can't open display: :0.1. X must be running and $DISPLAY set. >>> [EMAIL PROTECTED]:~$ >>> >>> >>> The module I run has the following version: >>> (II) LoadModule: "ati" >>> (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so >>> (II) Module ati: vendor="X.Org Foundation" >>> compiled for 1.4.2, module version = 6.9.0 >>> Module class: X.Org Video Driver >>> ABI class: X.Org Video Driver, version 2.0 >>> (II) LoadModule: "radeon" >>> (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so >>> (II) Module radeon: vendor="X.Org Foundation" >>> compiled for 1.4.2, module version = 4.3.0 >>> Module class: X.Org Video Driver >>> ABI class: X.Org Video Driver, version 2.0 >>> >>> >>> There is no difference if I set up "ati" or "readeon" driver directly in the >>> xorg.conf. >>> >> ati is just a wrapper. it loads radeon or r128 or mach64 depending on >> what chip you have, so it doesn't matter which one you have. >> >>> Any hint, what to do? >> In your case, since you system has LVDS, DVI, and VGA, it's ending up >> with DVI and VGA for each zaphod head. You'll have to force the >> connector table to get this to work. If you want to use LVDS and VGA, >> add this option to each device section: >> >> Option "ConnectorTable" "0,0,0,7,96,1,0,1" >> >> Alex > _______________________________________________ > xorg-driver-ati mailing list > [email protected] > http://lists.x.org/mailman/listinfo/xorg-driver-ati _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
