>>> For those of you with IGP chips and PAL here's a potential patch. Please >>> test and let me know if it works for you. I had to guess at the restart >>> stuff as the dumps didn't cover the 0x8xx range where those registers are >>> (specifically, I'd like to see TV_HRESTART (0x838), TV_VRESTART (0x83C), >>> and TV_HSTART (0x818)). However the patch may just work. >> >> >> Hi. >> >> My asus pundit-r can't detect the connected tv, so all I get is a black >> screen. It's been like this since before applying the patch. Can anyone >> provide a working xorg.conf? At least, one that detects the tv. I have no >> monitor. > > Add the following
options to the device section of your xorg.conf to > force tv-out on: > Option "ForceTVOut" "true" > Option "TVStandard" "pal" > > Or add this option to try to enable TV dac load detection: > Option "TVDACLoadDetect" "true" > > It's disabled by default as it's not reliable in all cases. > > Alex > Close!! It nearly works! I could get tv-out, but the image isn't perfect yet. what I mean is that I see it clearly, but it "jumps" a bit (as it sounds). It is centered and you could read as in another screen. If needed, I could record a video with my digital camera, althought the quality isn't very good. For now, here is the result of just running X. (II) Module "ddc" already built-in (II) Module "i2c" already built-in NTSC PAL PAL-M NTSC-J finished output detect: 0 finished output detect: 1 finished output detect: 2 finished all detect before xf86InitialConfiguration in RADEONProbeOutputModes after xf86InitialConfiguration (II) Module "ramdac" already built-in Entering TV Save Save TV timing tables saveTimingTables: reading timing tables TV Save done init memmap init common init crtc1 init pll1 freq: 38250000 best_freq: 38240909 best_feedback_div: 235 best_ref_div: 11 best_post_div: 8 restore memmap restore common restore crtc1 restore pll1 finished PLL1 computeRestarts: def = 702307, h = 0, v = 0, p1=124f, p2=1b22, restart = 702307 computeRestarts: F/H/V=0,622,691 computeRestarts: hSize=0,hInc=1301 restore tv Entering Restore TV Restore TV PLL Restore TVHV Restore TV Restarts Restore Timing Tables Restore TV standard Leaving Restore TV computeRestarts: def = 702307, h = 0, v = 0, p1=124f, p2=1b22, restart = 702307 computeRestarts: F/H/V=0,622,691 computeRestarts: hSize=0,hInc=1301 computeRestarts: def = 702307, h = 0, v = 0, p1=124f, p2=1b22, restart = 702307 computeRestarts: F/H/V=0,622,691 computeRestarts: hSize=0,hInc=1301 computeRestarts: def = 702307, h = 0, v = 0, p1=124f, p2=1b22, restart = 702307 computeRestarts: F/H/V=0,622,691 computeRestarts: hSize=0,hInc=1301 Thanks a lot for your work. Alberto _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
