On Sat, 2009-05-02 at 07:35 +0100, Mike Lothian wrote: > 2009/5/2 Jerome Glisse <[email protected]>: > > On Fri, 2009-05-01 at 20:59 +0100, Mike Lothian wrote: > >> Hi there > >> > >> I've had a few issues testing the new radeon code and rather than do > >> all this through comments on a blog I thought the mailing lists would > >> be better > >> > >> I've attached the above logs > >> > >> X doesn't start with KMS (KMS works during boot) > >> > >> with radeon.modeset=0 being passed but playing a video full screen or > >> activating kwin compositing makes the session unusable > >> > >> The proof attachment shows what branches and where head was at during > >> compile time > >> > >> Cheers > >> > >> Mike > > > > Quick guess you are missing DRI2 bits, either too old xserver (need 1.6 > > at least) or no dri2 proto installed. Still i don't understand what > > you mean by radeon.modeset=0, with radeon.modeset=0 everythings should > > work as with no kms (ie it use old code path which should be more or > > less what you already have). > > > > Cheers, > > Jerome Glisse > > > > > > My whole xorg stack is the latest git head my Xorg.0.log should confirm that >
Still X tries to initialize DRI1 instead of DRI2 the cause is likely because Xserver is not compiled with DRI2 enabled (i thought it was default). I will hack ddx to fail if Xserver tries to initialize DRI1 when in KMS mode. Cheers, Jerome Glisse _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
