2009/5/2 Jerome Glisse <[email protected]>: > On Sat, 2009-05-02 at 07:35 +0100, Mike Lothian wrote: >> 2009/5/2 Jerome Glisse <[email protected]>: >> > On Fri, 2009-05-01 at 20:59 +0100, Mike Lothian wrote: >> >> Hi there >> >> >> >> I've had a few issues testing the new radeon code and rather than do >> >> all this through comments on a blog I thought the mailing lists would >> >> be better >> >> >> >> I've attached the above logs >> >> >> >> X doesn't start with KMS (KMS works during boot) >> >> >> >> with radeon.modeset=0 being passed but playing a video full screen or >> >> activating kwin compositing makes the session unusable >> >> >> >> The proof attachment shows what branches and where head was at during >> >> compile time >> >> >> >> Cheers >> >> >> >> Mike >> > >> > Quick guess you are missing DRI2 bits, either too old xserver (need 1.6 >> > at least) or no dri2 proto installed. Still i don't understand what >> > you mean by radeon.modeset=0, with radeon.modeset=0 everythings should >> > work as with no kms (ie it use old code path which should be more or >> > less what you already have). >> > >> > Cheers, >> > Jerome Glisse >> > >> > >> >> My whole xorg stack is the latest git head my Xorg.0.log should confirm that >> > > Still X tries to initialize DRI1 instead of DRI2 the cause is likely > because Xserver is not compiled with DRI2 enabled (i thought it was > default). I will hack ddx to fail if Xserver tries to initialize DRI1 > when in KMS mode. > > Cheers, > Jerome Glisse > >
I'll give it another test in 2 weeks when I get back from holiday Mike _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
