http://bugs.freedesktop.org/show_bug.cgi?id=21767
--- Comment #10 from Oldrich Jedlicka <[email protected]> 2009-05-16 17:16:39 PST --- It was easier than I thought. The 6.12 branch worked much better. I tried the setup with two monitors from the beginning, I had the screen on LVDS, but 1024x768 only. After I logged into the KDE 3.5.10, the xrandr was able to set 1280x800 on LVDS (`xrandr --output LVDS --auto`), but I was not able to change resolution on DVI-0: xrandr: cannot find crtc for output DVI-0 The output from `xrandr` after I run the `xrandr --output LVDS --auto` command looked like (LVDS is native 1280x800, DVI-0 is native 1280x1024): Screen 0: minimum 320 x 200, current 1280 x 800, maximum 1400 x 1400 LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm 1280x800 60.0*+ 1280x720 59.9 1152x768 59.8 1024x768 60.0 59.9 800x600 60.3 59.9 640x480 59.9 59.4 VGA-0 disconnected (normal left inverted right x axis y axis) HDMI-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0 + 75.0 60.0 60.0 1400x1050 60.0 1280x960 60.0 1152x864 75.0 75.0 1024x768 75.1 75.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DVI-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0 + 75.0 60.0 60.0 1400x1050 60.0 1280x960 60.0 1152x864 75.0 75.0 1024x768 75.1 75.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9 720x400 70.1 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
