On 09.08.2010 11:10, Alex Deucher wrote:
Does tv-out work with kms if you force it on with xrandr? load
detection, which is used for detection on tv-out, is not always
reliable.
Hello, Alex,
I try
$ xrandr --addmode DIN 640x480
$ xrandr --output DIN --crtc 0 --mode 640x480 --right-of DVI-0
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1024, maximum 8192 x 8192
DIN disconnected 640x480+1280+0 (normal left inverted right x axis y
axis) 0mm x 0mm
640x480 72.8*
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis)
340mm x 270mm
1280x1024 75.0*+ 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
But there is no picture on TV.
Also I try
$ xrandr --newmode tv 25.2 640 656 752 800 480 490 492 525 -HSync -VSync
$ xrandr --addmode DIN tv
$ xrandr --output DIN --mode tv
$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
DIN disconnected 640x480+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
tv 59.5*
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis)
340mm x 270mm
1280x1024 75.0*+ 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
with the same result.
$ xrandr --output DIN --set "load detection" 0
has no effect too.
_______________________________________________
xorg-driver-ati mailing list
[email protected]
http://lists.x.org/mailman/listinfo/xorg-driver-ati
