On Mon, Aug 9, 2010 at 4:52 PM, Sergej Pupykin <[email protected]> wrote: > On 09.08.2010 11:10, Alex Deucher wrote: >> >> Does tv-out work with kms if you force it on with xrandr? load >> detection, which is used for detection on tv-out, is not always >> reliable. > > Hello, Alex, > > I try > > $ xrandr --addmode DIN 640x480 > $ xrandr --output DIN --crtc 0 --mode 640x480 --right-of DVI-0
Also, if crtc 0 is already being used for DVI-0, this won't work. xrandr --verbose will tell you which crtcs are currently in use by which connectors. Alex > $ xrandr > Screen 0: minimum 320 x 200, current 1920 x 1024, maximum 8192 x 8192 > DIN disconnected 640x480+1280+0 (normal left inverted right x axis y axis) > 0mm x 0mm > 640x480 72.8* > VGA-0 disconnected (normal left inverted right x axis y axis) > DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) > 340mm x 270mm > 1280x1024 75.0*+ 60.0 > 1152x864 75.0 > 1024x768 75.1 70.1 60.0 > 832x624 74.6 > 800x600 72.2 75.0 60.3 56.2 > 640x480 72.8 75.0 66.7 60.0 > 720x400 70.1 > > But there is no picture on TV. > > Also I try > $ xrandr --newmode tv 25.2 640 656 752 800 480 490 492 525 -HSync -VSync > $ xrandr --addmode DIN tv > $ xrandr --output DIN --mode tv > $ xrandr > Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192 > DIN disconnected 640x480+0+0 (normal left inverted right x axis y axis) 0mm > x 0mm > tv 59.5* > VGA-0 disconnected (normal left inverted right x axis y axis) > DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) > 340mm x 270mm > 1280x1024 75.0*+ 60.0 > 1152x864 75.0 > 1024x768 75.1 70.1 60.0 > 832x624 74.6 > 800x600 72.2 75.0 60.3 56.2 > 640x480 72.8 75.0 66.7 60.0 > 720x400 70.1 > > with the same result. > > $ xrandr --output DIN --set "load detection" 0 > has no effect too. > _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
