Am Mon, 30 Mar 2009 10:00:49 -0400 schrieb Alex Deucher <[email protected]>:
> On 3/30/09, Andreas Juch <[email protected]> wrote: > > Ok. I have a RV350 (Mobility Radeon 9600 M10) so this would explain > > the bad picture on the tv. Thanks for the info! > > > > That chip should work fine. What version of the driver are you using? > PAL support was broken until 6.9.0. Hi! I'm using version 6.10.0 which I compiled from the Debian experimental package for my Debian lenny system. The commands I use for turning the S-video output on are: ~~~ xrandr --output S-video --set load_detection 1 xrandr --addmode S-video 800x600 xrandr --output S-video --set tv_standard pal xrandr --output S-video --mode 800x600 --right-of LVDS ~~~ After doing that, xrandr says: ~~~ Screen 0: minimum 320 x 200, current 2080 x 800, maximum 2080 x 800 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x800 60.1*+ 60.0 1280x768 60.0 1024x768 60.0 800x600 60.3 640x480 59.9 S-video connected 800x600+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm 800x600 59.9*+ 60.3 ~~~ The relevant lspci-line is: ~~~ 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] ~~~ I pasted the Xorg.log to http://pastebin.com/m1a509848. The steps I did were: Turn TV on with the commands above, switch to VT and again the commands from above. Best regards, Andreas Juch
signature.asc
Description: PGP signature
_______________________________________________ xorg mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/xorg
