>> >> >> ------------------------------------------------------------------------ >> >> Sujet: >> troobleshoot X on laptop >> Expéditeur: >> "Morgan M.C.M-L" <[email protected]> >> Date: >> Wed, 06 Jan 2010 19:17:08 +0100 >> Destinataire: >> [email protected] >> >> Destinataire: >> [email protected] >> >> >> Hello >> >> I've been installing >> NetBSD on a laptop Acer Inspire 1350 but I have some trooble with X. >> >> 1- 'X -configure' gave me a skeleton in '/root/xorg.conf.new' >> >> 2- I wrote in : >> >> HorizSync 31.5 - 48.0 >> VertRefresh 59.0 - 75.0 >> Modes "1024x768" >> >> 3- 'X -config /root/xorg.conf.new' gave me red/black vertical waves >> and the lappy was frozen. >> >> 4- Changing driver 'Via' by 'Vesa' gave me red/black/blue vertical >> waves and the lappy was frozen. >> >> 5- Trying lots of diferents 'Modes' and 'Refresh' have been the same. >> >> 6- xorgconfig gave me a file wich freeze with a black screen. >> >> >> >> So I think I will ?? Compile a new Xorg ?? Xfree ?? At least I need >> little help. Here are some files 'Xorg.0.log, xorg.conf, >> xorg.conf.xorgconfig, dmesg' >> >> ------------------------------------------------------------------------ >> >> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, >> 2005, >> 2006, 2007, 2008, 2009 >> The NetBSD Foundation, Inc. All rights reserved. >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights reserved. >> >> NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009 >> >> [email protected]:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC >> >> >> total memory = 702 MB >> avail memory = 678 MB >> timecounter: Timecounters tick every 10.000 msec >> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 >> Acer,Inc. Aspire 1350 (3A24) >> mainbus0 (root) >> cpu0 at mainbus0: AMD 686-class, 796MHz, id 0x6a0 >> cpu0: AMD Powernow! K7 Technology 1716 MHz >> cpu0: frequencies available (Mhz): 1188 1320 1452 1584 1716 >> acpi0 at mainbus0: Intel ACPICA 20080321 >> acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000> >> LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 0 >> LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 0 >> LNKC: ACPI: Found matching pin for 0.16.INTC at func 2: 0 >> LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 0 >> LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 0 >> LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 9 >> LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 4 >> LNKB: ACPI: Found matching pin for 0.7.INTA at func 0: 255 >> LNKB: ACPI: Found matching pin for 0.8.INTA at func 0: 5 >> acpi0: SCI interrupting at int 10 >> acpi0: fixed-feature power button present >> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 >> ACPI-Fast 24-bit timer >> acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter >> acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method) >> npx1 at acpi0 (COPR, PNP0C04) >> npx1: io 0xf0-0xff irq 13 >> npx1: reported by CPUID; using exception 16 >> attimer1 at acpi0 (TMR, PNP0100): AT Timer >> attimer1: io 0x40-0x43 irq 0 >> pcppi1 at acpi0 (SPKR, PNP0800) >> pcppi1: io 0x61 >> midi0 at pcppi1: PC speaker (CPU-intensive output) >> sysbeep0 at pcppi1 >> pckbc1 at acpi0 (KBC0, PNP0303): kbd port >> pckbc1: io 0x60,0x64 irq 1 >> pckbc2 at acpi0 (MSE0, PNP0F13): aux port >> pckbc2: irq 12 >> LPTB (PNP0400) at acpi0 not configured >> FDC (PNP0700) at acpi0 not configured >> FIR (NSC6001) at acpi0 not configured >> acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller >> acpiec0: io 0x62,0x66 >> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button >> acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button >> acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch >> acpitz0 at acpi0 (THRM): critical 87.0C passive 52.0C, passive cooling >> apm0 at acpi0: Power Management spec V1.2 >> attimer1: attached to pcppi1 >> pckbd0 at pckbc1 (kbd slot) >> pckbc1: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard >> pms0 at pckbc1 (aux slot) >> pms0: Synaptics touchpad version 5.8 >> pms0: Up/down buttons, Palm detect, Multi-finger >> pckbc1: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pci0 at mainbus0 bus 0: configuration mode 1 >> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok >> pchb0 at pci0 dev 0 function 0 >> pchb0: vendor 0x1106 product 0x3205 (rev. 0x00) >> agp0 at pchb0 (v3): aperture at 0xe0000000, size 0x10000000 >> ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb168 (rev. 0x00) >> pci1 at ppb0 bus 1 >> pci1: i/o space, memory space enabled >> vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x7205 (rev. 0x01) >> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using >> wskbd0 >> wsmux1: connecting to wsdisplay0 >> drm at vga1 not configured >> cbb0 at pci0 dev 7 function 0: vendor 0x104c product 0xac50 (rev. 0x02) >> fwohci0 at pci0 dev 8 function 0: vendor 0x104c product 0x8026 (rev. >> 0x00) >> fwohci0: interrupting at irq 5 >> fwohci0: OHCI version 1.10 (ROM=1) >> fwohci0: No. of Isochronous channels is 4. >> fwohci0: EUI64 00:c0:9f:00:00:15:96:b9 >> fwohci0: Phy 1394a available S400, 1 ports. >> fwohci0: Link S400, max_rec 2048 bytes. >> ieee1394if0 at fwohci0: IEEE1394 bus >> fwip0 at ieee1394if0: IP over IEEE1394 >> fwohci0: Initiate bus reset >> uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. >> 0x80) >> uhci0: interrupting at irq 4 >> usb0 at uhci0: USB revision 1.0 >> uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. >> 0x80) >> uhci1: interrupting at irq 5 >> usb1 at uhci1: USB revision 1.0 >> uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. >> 0x80) >> uhci2: interrupting at irq 9 >> usb2 at uhci2: USB revision 1.0 >> ehci0 at pci0 dev 16 function 3: vendor 0x1106 product 0x3104 (rev. >> 0x82) >> ehci0: interrupting at irq 11 >> ehci0: dropped intr workaround enabled >> ehci0: EHCI version 1.0 >> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 >> usb3 at ehci0: USB revision 2.0 >> pcib0 at pci0 dev 17 function 0 >> pcib0: vendor 0x1106 product 0x3177 (rev. 0x00) >> viaide0 at pci0 dev 17 function 1 >> viaide0: VIA Technologies VT8235 ATA133 controller >> viaide0: bus-master DMA support present >> viaide0: primary channel configured to compatibility mode >> viaide0: primary channel interrupting at irq 14 >> atabus0 at viaide0 channel 0 >> viaide0: secondary channel configured to compatibility mode >> viaide0: secondary channel interrupting at irq 15 >> atabus1 at viaide0 channel 1 >> auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio >> (rev 0x50) >> auvia0: interrupting at irq 9 >> auvia0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 >> bit ADC, Realtek 3D >> auvia0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA> >> audio0 at auvia0: full duplex, mmap, independent >> vendor 0x1106 product 0x3068 (miscellaneous communications, revision >> 0x80) at pci0 dev 17 function 6 not configured >> vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet >> vr0: interrupting at irq 4 >> vr0: Ethernet address: 00:c0:9f:36:30:2c >> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface >> ukphy0: OUI 0x0002c6, model 0x0032, rev. 8 >> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> cbb0: cacheline 0x0 lattimer 0x10 >> cbb0: bhlc 0x21000 >> cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP >> cbb0: interrupting at irq 5 >> cardslot0 at cbb0 >> pcmcia0 at cardslot0 >> isa0 at pcib0 >> lpt0 at isa0 port 0x378-0x37b irq 7 >> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo >> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 >> fwohci0: BUS reset >> fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode >> ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >> ieee1394if0: bus manager 0 (me) >> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 >> uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, >> addr 1 >> uhub0: 2 ports with 2 removable, self powered >> uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, >> addr 1 >> uhub1: 2 ports with 2 removable, self powered >> uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, >> addr 1 >> uhub2: 2 ports with 2 removable, self powered >> uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, >> addr 1 >> uhub3: 6 ports with 6 removable, self powered >> acpiacad0: AC adapter online. >> wd0 at atabus0 drive 0: <IBM-DBCA-206480> >> wd0: drive supports 16-sector PIO transfers, LBA addressing >> wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 >> sectors >> wd0: 32-bit data port >> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) >> wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) >> (using DMA) >> atapibus0 at atabus1: 2 targets >> cd0 at atapibus0 drive 0: <Slimtype COMBO LSC-24082K, , JKQ1> cdrom >> removable >> cd0: 32-bit data port >> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) >> cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) >> (using DMA) >> Kernelized RAIDframe activated >> pad0: outputs: 44100Hz, 16-bit, stereo >> audio1 at pad0: half duplex >> boot device: wd0 >> root on wd0a dumps on wd0b >> root file system type: ffs >> wsdisplay0: screen 1 added (80x25, vt100 emulation) >> wsdisplay0: screen 2 added (80x25, vt100 emulation) >> wsdisplay0: screen 3 added (80x25, vt100 emulation) >> wsdisplay0: screen 4 added (80x25, vt100 emulation) >> >> ------------------------------------------------------------------------ >> >> >> X.Org X Server 1.4.2 >> Release Date: 11 June 2008 >> X Protocol Version 11, Revision 0 >> Build Operating System: NetBSD/i386 - Current Operating System: >> NetBSD delphine-2. 5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 >> 01:39:11 UTC 2009 >> [email protected]:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC >> >> i386 >> Build Date: 11 June 2008 04:31:59PM >> >> Before reporting problems, check http://wiki.X.Org >> to make sure that you have the latest version. >> Module Loader present >> Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 5 23:12:25 2010 >> (++) Using config file: "xorg.conf.new" >> (==) ServerLayout "X.org Configured" >> (**) |-->Screen "Screen0" (0) >> (**) | |-->Monitor "Monitor0" >> (**) | |-->Device "Card0" >> (**) |-->Input Device "Mouse0" >> (**) |-->Input Device "Keyboard0" >> (==) Automatically adding devices >> (==) Automatically enabling devices >> (WW) `fonts.dir' not found (or not valid) in >> "/usr/X11R7/lib/X11/fonts/Speedo/". >> Entry deleted from font path. >> (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/"). >> (WW) `fonts.dir' not found (or not valid) in >> "/usr/X11R7/lib/X11/fonts/CID/". >> Entry deleted from font path. >> (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/"). >> (==) Including the default font path >> /usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/Speedo/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/CID/,/usr/X11R7/lib/X11/fonts/75dpi/,/usr/X11R7/lib/X11/fonts/100dpi/. >> >> >> (**) FontPath set to: >> /usr/X11R7/lib/X11/fonts/misc/, >> /usr/X11R7/lib/X11/fonts/TTF/, >> /usr/X11R7/lib/X11/fonts/Type1/, >> /usr/X11R7/lib/X11/fonts/75dpi/, >> /usr/X11R7/lib/X11/fonts/100dpi/, >> /usr/X11R7/lib/X11/fonts/misc/, >> /usr/X11R7/lib/X11/fonts/TTF/, >> /usr/X11R7/lib/X11/fonts/Speedo/, >> /usr/X11R7/lib/X11/fonts/Type1/, >> /usr/X11R7/lib/X11/fonts/CID/, >> /usr/X11R7/lib/X11/fonts/75dpi/, >> /usr/X11R7/lib/X11/fonts/100dpi/ >> (**) RgbPath set to "/usr/X11R7/lib/X11/rgb" >> (**) ModulePath set to "/usr/X11R7/lib/modules" >> (II) Loader magic: 0x81b8a60 >> (II) Module ABI versions: >> X.Org ANSI C Emulation: 0.3 >> X.Org Video Driver: 2.0 >> X.Org XInput driver : 2.0 >> X.Org Server Extension : 0.3 >> X.Org Font Renderer : 0.5 >> (II) Loader running on netbsd >> (II) LoadModule: "pcidata" >> (II) Loading /usr/X11R7/lib/modules//libpcidata.so >> (II) Module pcidata: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org Video Driver, version 2.0 >> (--) Using wscons driver in pcvt compatibility mode (version 3.32) >> (--) using VT number 5 >> >> (II) PCI: Probing config type using method 1 >> (II) PCI: Config type is 1 >> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 >> (WW) OS did not count PCI devices, guessing wildly >> (II) PCI: PCI scan (all values are in hex) >> (II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class >> 06,00,00 hdr 00 >> (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class >> 06,04,00 hdr 01 >> (II) PCI: 00:07:0: chip 104c,ac50 card fffc,ffff rev 02 class >> 06,07,00 hdr 02 >> (II) PCI: 00:08:0: chip 104c,8026 card 1025,0033 rev 00 class >> 0c,00,10 hdr 00 >> (II) PCI: 00:10:0: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:1: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:2: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:3: chip 1106,3104 card 1025,0033 rev 82 class >> 0c,03,20 hdr 00 >> (II) PCI: 00:11:0: chip 1106,3177 card 1025,0033 rev 00 class >> 06,01,00 hdr 80 >> (II) PCI: 00:11:1: chip 1106,0571 card 1025,0033 rev 06 class >> 01,01,8a hdr 00 >> (II) PCI: 00:11:5: chip 1106,3059 card 1025,0033 rev 50 class >> 04,01,00 hdr 00 >> (II) PCI: 00:11:6: chip 1106,3068 card 1025,0033 rev 80 class >> 07,80,00 hdr 00 >> (II) PCI: 00:12:0: chip 1106,3065 card 1025,0033 rev 74 class >> 02,00,00 hdr 00 >> (II) PCI: 01:00:0: chip 1106,7205 card 1025,0033 rev 01 class >> 03,00,00 hdr 00 >> (II) PCI: End of PCI scan >> (II) Host-to-PCI bridge: >> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) >> (II) Bus 0 I/O range: >> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] >> (II) Bus 0 non-prefetchable memory range: >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> (II) Bus 0 prefetchable memory range: >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> (II) PCI-to-PCI bridge: >> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) >> (II) Bus 1 non-prefetchable memory range: >> [0] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B] >> (II) Bus 1 prefetchable memory range: >> [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B] >> (II) PCI-to-ISA bridge: >> (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN >> is set) >> (--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x7205) >> rev 1, Mem @ 0xf0000000/26, 0xd1000000/24 >> (II) Addressable bus resource ranges are >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] >> (II) OS-reported resource ranges: >> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) >> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> (II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff >> to 0xdfffffff >> (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff >> to 0xd0ffffff >> (II) Active PCI resource ranges: >> [0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E >> [1] -1 0 0xd0004800 - 0xd0004fff (0x800) MX[B]E >> [2] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B]E >> [3] -1 0 0xd0004000 - 0xd0007fff (0x4000) MX[B]E >> [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO >> [5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B) >> [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) >> [7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E >> [8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E >> [9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E >> [10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E >> [11] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B]E >> [12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E >> [13] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E >> (II) PCI Memory resource overlap reduced 0xd0004800 from 0xd0004fff >> to 0xd0004bff >> (II) PCI I/O resource overlap reduced 0x00001c40 from 0x00001c7f to >> 0x00001c5f >> (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to >> 0x00001c1f >> (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd0ffffff >> to 0xd0003fff >> (II) PCI Memory resource overlap reduced 0xd0004000 from 0xd0007fff >> to 0xd00047ff >> (II) Active PCI resource ranges after removing overlaps: >> [0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E >> [1] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E >> [2] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E >> [3] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E >> [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO >> [5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B) >> [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) >> [7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E >> [8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E >> [9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E >> [10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E >> [11] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E >> [12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E >> [13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E >> (II) OS-reported resource ranges after removing overlaps with PCI: >> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) >> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> (II) All system resource ranges: >> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) >> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E >> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E >> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E >> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E >> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO >> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B) >> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) >> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> [13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E >> [14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E >> [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E >> [16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E >> [17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E >> [18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E >> [19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E >> (II) "extmod" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "dbe" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "glx" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "freetype" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "type1" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "record" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) "dri" will be loaded. This was enabled by default and also >> specified in the config file. >> (II) LoadModule: "cfb" >> (II) Loading /usr/X11R7/lib/modules/extensions//libcfb.so >> (II) Module cfb: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org ANSI C Emulation, version 0.3 >> (II) Loading sub module "mfb" >> (II) LoadModule: "mfb" >> (II) Loading /usr/X11R7/lib/modules/extensions//libmfb.so >> (II) Module mfb: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org ANSI C Emulation, version 0.3 >> (II) LoadModule: "cfb32" >> (II) Loading /usr/X11R7/lib/modules/extensions//libcfb32.so >> (II) Module cfb32: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org ANSI C Emulation, version 0.3 >> (II) Loading sub module "cfb" >> (II) LoadModule: "cfb" >> (II) Reloading /usr/X11R7/lib/modules/extensions//libcfb.so >> (II) Loading sub module "mfb" >> (II) LoadModule: "mfb" >> (II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so >> (II) LoadModule: "dbe" >> (II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so >> (II) Module dbe: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 0.3 >> (II) Loading extension DOUBLE-BUFFER >> (II) LoadModule: "dri" >> (II) Loading /usr/X11R7/lib/modules/extensions//libdri.so >> (II) Module dri: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org Server Extension, version 0.3 >> (II) Loading extension XFree86-DRI >> (II) LoadModule: "extmod" >> (II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so >> (II) Module extmod: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 0.3 >> (II) Loading extension SHAPE >> (II) Loading extension MIT-SUNDRY-NONSTANDARD >> (II) Loading extension BIG-REQUESTS >> (II) Loading extension SYNC >> (II) Loading extension MIT-SCREEN-SAVER >> (II) Loading extension XC-MISC >> (II) Loading extension XFree86-VidModeExtension >> (II) Loading extension XFree86-Misc >> (II) Loading extension XFree86-DGA >> (II) Loading extension DPMS >> (II) Loading extension TOG-CUP >> (II) Loading extension Extended-Visual-Information >> (II) Loading extension XVideo >> (II) Loading extension XVideo-MotionCompensation >> (II) Loading extension X-Resource >> (II) LoadModule: "glx" >> (II) Loading /usr/X11R7/lib/modules/extensions//libglx.so >> (II) Module glx: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org Server Extension, version 0.3 >> (==) AIGLX enabled >> (II) Loading extension GLX >> (II) LoadModule: "mfb" >> (II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so >> (II) LoadModule: "record" >> (II) Loading /usr/X11R7/lib/modules/extensions//librecord.so >> (II) Module record: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.13.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 0.3 >> (II) Loading extension RECORD >> (II) LoadModule: "shadow" >> (II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so >> (II) Module shadow: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.1.0 >> ABI class: X.Org ANSI C Emulation, version 0.3 >> (II) LoadModule: "xtrap" >> (II) Loading /usr/X11R7/lib/modules/extensions//libxtrap.so >> (II) Module xtrap: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> Module class: X.Org Server Extension >> ABI class: X.Org Server Extension, version 0.3 >> (II) Loading extension DEC-XTRAP >> (II) LoadModule: "freetype" >> (II) Loading /usr/X11R7/lib/modules/fonts//libfreetype.so >> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" >> compiled for 1.4.2, module version = 2.1.0 >> Module class: X.Org Font Renderer >> ABI class: X.Org Font Renderer, version 0.5 >> (II) Loading font FreeType >> (II) LoadModule: "type1" >> (II) Loading /usr/X11R7/lib/modules/fonts//libtype1.so >> (II) Module type1: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.2 >> Module class: X.Org Font Renderer >> ABI class: X.Org Font Renderer, version 0.5 >> (II) Loading font Type1 >> (II) LoadModule: "vesa" >> (II) Loading /usr/X11R7/lib/modules/drivers//vesa_drv.so >> (II) Module vesa: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.3.0 >> Module class: X.Org Video Driver >> ABI class: X.Org Video Driver, version 2.0 >> (II) LoadModule: "mouse" >> (II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so >> (II) Module mouse: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.3.0 >> Module class: X.Org XInput Driver >> ABI class: X.Org XInput driver, version 2.0 >> (II) LoadModule: "kbd" >> (II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so >> (II) Module kbd: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.3.1 >> Module class: X.Org XInput Driver >> ABI class: X.Org XInput driver, version 2.0 >> (II) VESA: driver for VESA chipsets: vesa >> (II) Primary Device is: PCI 01:00:0 >> (--) Chipset vesa found >> (II) resource ranges after xf86ClaimFixedResources() call: >> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) >> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E >> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E >> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E >> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E >> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO >> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B) >> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) >> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> [13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E >> [14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E >> [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E >> [16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E >> [17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E >> [18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E >> [19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E >> (II) resource ranges after probing: >> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) >> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E >> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E >> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E >> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E >> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO >> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B) >> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) >> [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] >> [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] >> [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] >> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> [16] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E >> [17] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E >> [18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E >> [19] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E >> [20] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E >> [21] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E >> [22] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E >> [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] >> [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] >> (II) Setting vga for screen 0. >> (II) Loading sub module "vbe" >> (II) LoadModule: "vbe" >> (II) Loading /usr/X11R7/lib/modules//libvbe.so >> (II) Module vbe: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.1.0 >> ABI class: X.Org Video Driver, version 2.0 >> (II) Loading sub module "int10" >> (II) LoadModule: "int10" >> (II) Loading /usr/X11R7/lib/modules//libint10.so >> (II) Module int10: vendor="X.Org Foundation" >> compiled for 1.4.2, module version = 1.0.0 >> ABI class: X.Org Video Driver, version 2.0 >> (II) VESA(0): initializing int10 >> (WW) VESA(0): remove MTRR a0000 - c0000 >> (WW) VESA(0): remove MTRR c0000 - 100000 >> (II) VESA(0): Primary V_BIOS segment is: 0xc000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (II) VESA(0): VESA BIOS detected >> (II) VESA(0): VESA VBE Version 3.0 >> (II) VESA(0): VESA VBE Total Mem: 65536 kB >> (II) VESA(0): VESA VBE OEM: VIA KN400 >> >> (II) VESA(0): VESA VBE OEM Software Rev: 1.0 >> (II) VESA(0): VESA VBE OEM Vendor: (II) VESA(0): VESA VBE OEM >> Product: (II) VESA(0): VESA VBE OEM Product Rev: (WW) VESA(0): remove >> MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (==) VESA(0): Depth 24, (==) framebuffer bpp 32 >> (==) VESA(0): RGB weight 888 >> (==) VESA(0): Default visual is TrueColor >> (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) >> (II) Loading sub module "ddc" >> (II) LoadModule: "ddc"(II) Module "ddc" already built-in >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (II) VESA(0): VESA VBE DDC supported >> (II) VESA(0): VESA VBE DDC Level 2 >> (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (II) VESA(0): VESA VBE DDC read failed >> (II) VESA(0): Searching for matching VESA mode(s): >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> (WW) VESA(0): remove MTRR 0 - 1000 >> >> (II) VESA(0): Total Memory: 1024 64KB banks (65536kB) >> (EE) VESA(0): No matching modes >> (WW) VESA(0): remove MTRR 0 - 1000 >> (II) UnloadModule: "vesa" >> (II) UnloadModule: "int10" >> (II) Unloading /usr/X11R7/lib/modules//libint10.so >> (II) UnloadModule: "vbe" >> (II) Unloading /usr/X11R7/lib/modules//libvbe.so >> (EE) Screen(s) found, but none have a usable configuration. >> >> Fatal server error: >> no screens found >> >> Please consult the The X.Org Foundation support at >> http://wiki.X.Org >> for help. Please also check the log file at "/var/log/Xorg.0.log" >> for additional information. >> >> >> ------------------------------------------------------------------------ >> >> Section "Device" >> Identifier "Card0" >> Driver "via" >> VendorName "Unknown Vendor" >> BoardName "Unknown Board" >> BusID "PCI:1:0:0" >> EndSection >> Section "Device" >> ### Available Driver options are:- >> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", >> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" >> ### [arg]: arg optional >> #Option "VBEModes" # [<bool>] >> #Option "NoAccel" # [<bool>] >> #Option "HWCursor" # [<bool>] >> #Option "SWCursor" # [<bool>] >> #Option "ShadowFB" # [<bool>] >> #Option "Rotate" # [<str>] >> #Option "VideoRAM" # <i> >> #Option "ActiveDevice" # [<str>] >> #Option "LCDDualEdge" # [<bool>] >> #Option "BusWidth" # [<str>] >> #Option "Center" # [<bool>] >> #Option "PanelSize" # [<str>] >> #Option "ForcePanel" # [<bool>] >> #Option "TVDotCrawl" # [<bool>] >> #Option "TVDeflicker" # <i> >> #Option "TVType" # [<str>] >> #Option "TVOutput" # [<str>] >> #Option "DisableVQ" # [<bool>] >> #Option "DRIXINERAMA" # [<bool>] >> #Option "DisableIRQ" # [<bool>] >> #Option "EnableAGPDMA" # [<bool>] >> #Option "NoAGPFor2D" # [<bool>] >> #Option "NoXVDMA" # [<bool>] >> #Option "ExaNoComposite" # [<bool>] >> Identifier "Card0" >> Driver "via" >> VendorName "Unknown Vendor" >> BoardName "Unknown Board" >> BusID "PCI:1:0:0" >> EndSection >> Section "ServerLayout" >> Identifier "X.org Configured" >> Screen 0 "Screen0" 0 0 >> InputDevice "Mouse0" "CorePointer" >> InputDevice "Keyboard0" "CoreKeyboard" >> EndSection >> Section "Files" >> RgbPath "/usr/X11R7/lib/X11/rgb" >> ModulePath "/usr/X11R7/lib/modules" >> FontPath "/usr/X11R7/lib/X11/fonts/misc/" >> FontPath "/usr/X11R7/lib/X11/fonts/TTF/" >> FontPath "/usr/X11R7/lib/X11/fonts/Speedo/" >> FontPath "/usr/X11R7/lib/X11/fonts/Type1/" >> FontPath "/usr/X11R7/lib/X11/fonts/CID/" >> FontPath "/usr/X11R7/lib/X11/fonts/75dpi/" >> FontPath "/usr/X11R7/lib/X11/fonts/100dpi/" >> EndSection >> Section "Module" >> Load "GLcore" >> Load "cfb" >> Load "cfb32" >> Load "dbe" >> Load "dri" >> Load "extmod" >> Load "glx" >> Load "mfb" >> Load "record" >> Load "shadow" >> Load "xtrap" >> Load "freetype" >> Load "type1" >> EndSection >> Section "InputDevice" >> Identifier "Keyboard0" >> Driver "kbd" >> EndSection >> Section "InputDevice" >> Identifier "Mouse0" >> Driver "mouse" >> Option "Protocol" "wsmouse" >> Option "Device" "/dev/wsmouse" >> Option "ZAxisMapping" "4 5 6 7" >> EndSection >> Section "Monitor" >> Identifier "Monitor0" >> VendorName "Monitor Vendor" >> ModelName "Monitor Model" >> HorizSync 31.5 - 64.0 >> VertRefresh 50.0 - 90.0 >> # HorizSync 31.5 - 48.0 >> # VertRefresh 59.0 - 75.0 >> EndSection >> Section "Screen" >> Identifier "Screen0" >> Device "Card0" >> Monitor "Monitor0" >> SubSection "Display" >> Viewport 0 0 >> Depth 1 >> Modes "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 4 >> Modes "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 8 >> Modes "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 15 >> Modes "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 16 >> Modes "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> Modes "1024x768" "800x600" >> EndSubSection >> EndSection >> >> >> ------------------------------------------------------------------------ >> >> # File generated by xorgconfig. >> >> # >> # Copyright 2004 The X.Org Foundation >> # >> # Permission is hereby granted, free of charge, to any person >> obtaining a >> # copy of this software and associated documentation files (the >> "Software"), >> # to deal in the Software without restriction, including without >> limitation >> # the rights to use, copy, modify, merge, publish, distribute, >> sublicense, >> # and/or sell copies of the Software, and to permit persons to whom the >> # Software is furnished to do so, subject to the following conditions: >> # # The above copyright notice and this permission notice shall be >> included in >> # all copies or substantial portions of the Software. >> # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> EXPRESS OR >> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >> MERCHANTABILITY, >> # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT >> SHALL >> # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER >> LIABILITY, >> # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, >> OUT OF >> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE >> # SOFTWARE. >> # # Except as contained in this notice, the name of The X.Org >> Foundation shall >> # not be used in advertising or otherwise to promote the sale, use or >> other >> # dealings in this Software without prior written authorization from >> # The X.Org Foundation. >> # >> >> # ********************************************************************** >> # Refer to the xorg.conf(5) man page for details about the format of >> # this file. >> # ********************************************************************** >> >> # ********************************************************************** >> # Module section -- this section is used to specify >> # which dynamically loadable modules to load. >> # ********************************************************************** >> # >> Section "Module" >> >> # This loads the DBE extension module. >> >> Load "dbe" # Double buffer extension >> >> # This loads the miscellaneous extensions module, and disables >> # initialisation of the XFree86-DGA extension within that module. >> SubSection "extmod" >> Option "omit xfree86-dga" # don't initialise the DGA >> extension >> EndSubSection >> >> # This loads the font modules >> # Load "type1" >> Load "freetype" >> # Load "xtt" >> >> # This loads the GLX module >> # Load "glx" >> # This loads the DRI module >> # Load "dri" >> >> EndSection >> >> # ********************************************************************** >> # Files section. This allows default font and rgb paths to be set >> # ********************************************************************** >> >> Section "Files" >> >> # The location of the RGB database. Note, this is the name of the >> # file minus the extension (like ".txt" or ".db"). There is normally >> # no need to change the default. >> >> # RgbPath "/usr/share/X11/rgb" >> >> # Multiple FontPath entries are allowed (which are concatenated >> together), >> # as well as specifying multiple comma-separated entries in one FontPath >> # command (or a combination of both methods) >> # # >> # FontPath "/usr/lib/X11/fonts/local/" >> # FontPath "/usr/lib/X11/fonts/misc/" >> # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" >> # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" >> # FontPath "/usr/lib/X11/fonts/Speedo/" >> # FontPath "/usr/lib/X11/fonts/Type1/" >> # FontPath "/usr/lib/X11/fonts/TrueType/" >> # FontPath "/usr/lib/X11/fonts/freefont/" >> # FontPath "/usr/lib/X11/fonts/75dpi/" >> # FontPath "/usr/lib/X11/fonts/100dpi/" >> >> # The module search path. The default path is shown here. >> >> # ModulePath "/usr/lib/modules" >> >> EndSection >> >> # ********************************************************************** >> # Server flags section. >> # ********************************************************************** >> >> Section "ServerFlags" >> >> # Uncomment this to cause a core dump at the spot where a signal is # >> received. This may leave the console in an unusable state, but may >> # provide a better stack trace in the core dump to aid in debugging >> >> # Option "NoTrapSignals" >> >> # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence >> # (where n is 1 through 12). This allows clients to receive these key >> # events. >> >> # Option "DontVTSwitch" >> >> # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence >> # This allows clients to receive this key event. >> >> # Option "DontZap" >> >> # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching >> # sequences. This allows clients to receive these key events. >> >> # Option "Dont Zoom" >> >> # Uncomment this to disable tuning with the xvidtune client. With >> # it the client can still run and fetch card and monitor attributes, >> # but it will not be allowed to change them. If it tries it will >> # receive a protocol error. >> >> # Option "DisableVidModeExtension" >> >> # Uncomment this to enable the use of a non-local xvidtune client. >> # Option "AllowNonLocalXvidtune" >> >> # Uncomment this to disable dynamically modifying the input device >> # (mouse and keyboard) settings. >> # Option "DisableModInDev" >> >> # Uncomment this to enable the use of a non-local client to >> # change the keyboard or mouse settings (currently only xset). >> >> # Option "AllowNonLocalModInDev" >> >> EndSection >> >> # ********************************************************************** >> # Input devices >> # ********************************************************************** >> >> # ********************************************************************** >> # Core keyboard's InputDevice section >> # ********************************************************************** >> >> Section "InputDevice" >> >> Identifier "Keyboard1" >> Driver "kbd" >> >> Option "AutoRepeat" "500 30" >> >> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) >> # Option "Xleds" "1 2 3" >> >> # Option "LeftAlt" "Meta" >> # Option "RightAlt" "ModeShift" >> >> # To customise the XKB settings to suit your keyboard, modify the >> # lines below (which are the defaults). For example, for a non-U.S. >> # keyboard, you will probably want to use: >> # Option "XkbModel" "pc105" >> # If you have a US Microsoft Natural keyboard, you can use: >> # Option "XkbModel" "microsoft" >> # >> # Then to change the language, change the Layout setting. >> # For example, a german layout can be obtained with: >> # Option "XkbLayout" "de" >> # or: >> # Option "XkbLayout" "de" >> # Option "XkbVariant" "nodeadkeys" >> # >> # If you'd like to switch the positions of your capslock and >> # control keys, use: >> # Option "XkbOptions" "ctrl:swapcaps" >> >> # These are the default XKB settings for Xorg >> # Option "XkbRules" "xorg" >> # Option "XkbModel" "pc105" >> # Option "XkbLayout" "us" >> # Option "XkbVariant" "" >> # Option "XkbOptions" "" >> >> # Option "XkbDisable" >> >> Option "XkbRules" "xorg" >> Option "XkbModel" "pc105" >> Option "XkbLayout" "fr" >> Option "XkbVariant" "fr" >> >> EndSection >> >> >> # ********************************************************************** >> # Core Pointer's InputDevice section >> # ********************************************************************** >> >> Section "InputDevice" >> >> # Identifier and driver >> >> Identifier "Mouse1" >> Driver "mouse" >> Option "Protocol" "wsmouse" # wsmouse protocol >> Option "Device" "/dev/wsmouse" >> >> # Mouse-speed setting for PS/2 mouse. >> >> # Option "Resolution" "256" >> >> # Baudrate and SampleRate are only for some Logitech mice. In >> # almost every case these lines should be omitted. >> >> # Option "BaudRate" "9600" >> # Option "SampleRate" "150" >> >> # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 >> & 5, >> # horizontal wheel to buttons 6 & 7. Change if your mouse has more >> than >> # 3 buttons and you need to map the wheel to different button ids to >> avoid >> # conflicts. >> >> Option "ZAxisMapping" "4 5 6 7" >> >> # Emulate3Buttons is an option for 2-button mice >> # Emulate3Timeout is the timeout in milliseconds (default is 50ms) >> >> # Option "Emulate3Buttons" >> # Option "Emulate3Timeout" "50" >> >> # ChordMiddle is an option for some 3-button Logitech mice >> >> # Option "ChordMiddle" >> >> EndSection >> >> >> # ********************************************************************** >> # Other input device sections # this is optional and is required only >> if you >> # are using extended input devices. This is for example only. Refer >> # to the xorg.conf man page for a description of the options. >> # ********************************************************************** >> # >> # Section "InputDevice" # Identifier "Mouse2" >> # Driver "mouse" >> # Option "Protocol" "MouseMan" >> # Option "Device" "/dev/mouse2" >> # EndSection >> # >> # Section "InputDevice" >> # Identifier "spaceball" >> # Driver "magellan" >> # Option "Device" "/dev/cua0" >> # EndSection >> # >> # Section "InputDevice" >> # Identifier "spaceball2" >> # Driver "spaceorb" >> # Option "Device" "/dev/cua0" >> # EndSection >> # >> # Section "InputDevice" >> # Identifier "touchscreen0" >> # Driver "microtouch" >> # Option "Device" "/dev/ttyS0" >> # Option "MinX" "1412" >> # Option "MaxX" "15184" >> # Option "MinY" "15372" >> # Option "MaxY" "1230" >> # Option "ScreenNumber" "0" >> # Option "ReportingMode" "Scaled" >> # Option "ButtonNumber" "1" >> # Option "SendCoreEvents" >> # EndSection >> # >> # Section "InputDevice" >> # Identifier "touchscreen1" >> # Driver "elo2300" >> # Option "Device" "/dev/ttyS0" >> # Option "MinX" "231" >> # Option "MaxX" "3868" >> # Option "MinY" "3858" >> # Option "MaxY" "272" >> # Option "ScreenNumber" "0" >> # Option "ReportingMode" "Scaled" >> # Option "ButtonThreshold" "17" >> # Option "ButtonNumber" "1" >> # Option "SendCoreEvents" >> # EndSection >> >> # ********************************************************************** >> # Monitor section >> # ********************************************************************** >> >> # Any number of monitor sections may be present >> >> Section "Monitor" >> >> Identifier "My Monitor" >> >> # HorizSync is in kHz unless units are specified. >> # HorizSync may be a comma separated list of discrete values, or a >> # comma separated list of ranges of values. >> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S >> # USER MANUAL FOR THE CORRECT NUMBERS. >> >> HorizSync 31.5 >> >> # HorizSync 30-64 # multisync >> # HorizSync 31.5, 35.2 # multiple fixed sync frequencies >> # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies >> >> # VertRefresh is in Hz unless units are specified. >> # VertRefresh may be a comma separated list of discrete values, or a >> # comma separated list of ranges of values. >> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S >> # USER MANUAL FOR THE CORRECT NUMBERS. >> >> VertRefresh 50-70 >> >> EndSection >> >> >> # ********************************************************************** >> # Graphics device section >> # ********************************************************************** >> >> # Any number of graphics device sections may be present >> >> # Standard VGA Device: >> >> Section "Device" >> Identifier "Standard VGA" >> VendorName "Unknown" >> BoardName "Unknown" >> >> # The chipset line is optional in most cases. It can be used to >> override >> # the driver's chipset detection, and should not normally be specified. >> >> # Chipset "generic" >> >> # The Driver line must be present. When using run-time loadable driver >> # modules, this line instructs the server to load the specified driver >> # module. Even when not using loadable driver modules, this line >> # indicates which driver should interpret the information in this >> section. >> >> Driver "vesa" >> # The BusID line is used to specify which of possibly multiple devices >> # this section is intended for. When this line isn't present, a device >> # section can only match up with the primary video device. For PCI >> # devices a line like the following could be used. This line should not >> # normally be included unless there is more than one video device >> # intalled. >> >> # BusID "PCI:0:10:0" >> >> # VideoRam 256 >> >> # Clocks 25.2 28.3 >> >> EndSection >> >> # Device configured by xorgconfig: >> >> Section "Device" >> Identifier "* Generic VESA compatible" >> Driver "vesa" >> #VideoRam 65536 >> # Insert Clocks lines here if appropriate >> EndSection >> >> >> # ********************************************************************** >> # Screen sections >> # ********************************************************************** >> >> # Any number of screen sections may be present. Each describes >> # the configuration of a single screen. A single specific screen >> section >> # may be specified from the X server command line with the "-screen" >> # option. >> Section "Screen" >> Identifier "Screen 1" >> Device "* Generic VESA compatible" >> Monitor "My Monitor" >> DefaultDepth 16 >> >> Subsection "Display" >> Depth 8 >> Modes "1280x1024" "1024x768" "800x600" "640x480" >> ViewPort 0 0 >> EndSubsection >> Subsection "Display" >> Depth 16 >> Modes "1024x768" "800x600" "640x480" >> ViewPort 0 0 >> EndSubsection >> Subsection "Display" >> Depth 24 >> Modes "1280x1024" "1024x768" "800x600" "640x480" >> ViewPort 0 0 >> EndSubsection >> EndSection >> >> # ********************************************************************** >> # ServerLayout sections. >> # ********************************************************************** >> >> # Any number of ServerLayout sections may be present. Each describes >> # the way multiple screens are organised. A specific ServerLayout >> # section may be specified from the X server command line with the >> # "-layout" option. In the absence of this, the first section is used. >> # When now ServerLayout section is present, the first Screen section >> # is used alone. >> >> Section "ServerLayout" >> >> # The Identifier line must be present >> Identifier "Simple Layout" >> >> # Each Screen line specifies a Screen section name, and optionally >> # the relative position of other screens. The four names after >> # primary screen name are the screens to the top, bottom, left and right >> # of the primary screen. In this example, screen 2 is located to the >> # right of screen 1. >> >> Screen "Screen 1" >> >> # Each InputDevice line specifies an InputDevice section name and >> # optionally some options to specify the way the device is to be >> # used. Those options include "CorePointer", "CoreKeyboard" and >> # "SendCoreEvents". >> >> InputDevice "Mouse1" "CorePointer" >> InputDevice "Keyboard1" "CoreKeyboard" >> >> EndSection >> >> # Section "DRI" >> # Mode 0666 >> # EndSection >> >> > _______________________________________________ xorg mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/xorg
