Hello
I've been installing
NetBSD on a laptop Acer Inspire 1350 but I have some trooble with X.
1- 'X -configure' gave me a skeleton in '/root/xorg.conf.new'
2- I wrote in :
HorizSync 31.5 - 48.0
VertRefresh 59.0 - 75.0
Modes "1024x768"
3- 'X -config /root/xorg.conf.new' gave me red/black vertical waves and
the lappy was frozen.
4- Changing driver 'Via' by 'Vesa' gave me red/black/blue vertical waves
and the lappy was frozen.
5- Trying lots of diferents 'Modes' and 'Refresh' have been the same.
6- xorgconfig gave me a file wich freeze with a black screen.
So I think I will ?? Compile a new Xorg ?? Xfree ?? At least I need
little help. Here are some files 'Xorg.0.log, xorg.conf,
xorg.conf.xorgconfig, dmesg'
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: NetBSD/i386 -
Current Operating System: NetBSD delphine-2. 5.0.1 NetBSD 5.0.1 (GENERIC) #0:
Thu Jul 30 01:39:11 UTC 2009
[email protected]:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
i386
Build Date: 11 June 2008 04:31:59PM
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 5 23:12:25 2010
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/CID/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/").
(==) Including the default font path
/usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/Speedo/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/CID/,/usr/X11R7/lib/X11/fonts/75dpi/,/usr/X11R7/lib/X11/fonts/100dpi/.
(**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Speedo/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/CID/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R7/lib/modules"
(II) Loader magic: 0x81b8a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on netbsd
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R7/lib/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) Using wscons driver in pcvt compatibility mode (version 3.32)
(--) using VT number 5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 104c,ac50 card fffc,ffff rev 02 class 06,07,00 hdr 02
(II) PCI: 00:08:0: chip 104c,8026 card 1025,0033 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1025,0033 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1025,0033 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1025,0033 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1025,0033 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1025,0033 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1025,0033 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1025,0033 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 1025,0033 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1025,0033 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1106,7205 card 1025,0033 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x7205) rev 1, Mem @
0xf0000000/26, 0xd1000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to
0xdfffffff
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to
0xd0ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
[1] -1 0 0xd0004800 - 0xd0004fff (0x800) MX[B]E
[2] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B]E
[3] -1 0 0xd0004000 - 0xd0007fff (0x4000) MX[B]E
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
[11] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B]E
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
[13] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xd0004800 from 0xd0004fff to
0xd0004bff
(II) PCI I/O resource overlap reduced 0x00001c40 from 0x00001c7f to 0x00001c5f
(II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd0ffffff to
0xd0003fff
(II) PCI Memory resource overlap reduced 0xd0004000 from 0xd0007fff to
0xd00047ff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
[1] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
[2] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
[3] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
[11] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
[13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
[5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
[6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
[7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
[17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
[18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
[19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified
in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) LoadModule: "cfb"
(II) Loading /usr/X11R7/lib/modules/extensions//libcfb.so
(II) Module cfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Loading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) Module mfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) LoadModule: "cfb32"
(II) Loading /usr/X11R7/lib/modules/extensions//libcfb32.so
(II) Module cfb32: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "cfb"
(II) LoadModule: "cfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libcfb.so
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R7/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R7/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "mfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) LoadModule: "record"
(II) Loading /usr/X11R7/lib/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "shadow"
(II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R7/lib/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R7/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R7/lib/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vesa"
(II) Loading /usr/X11R7/lib/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01:00:0
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
[5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
[6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
[7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
[17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
[18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
[19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
[5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
[6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
[7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[17] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[19] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
[20] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
[21] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
[22] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R7/lib/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R7/lib/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) VESA(0): initializing int10
(WW) VESA(0): remove MTRR a0000 - c0000
(WW) VESA(0): remove MTRR c0000 - 100000
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65536 kB
(II) VESA(0): VESA VBE OEM: VIA KN400
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(==) VESA(0): Depth 24, (==) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): Searching for matching VESA mode(s):
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(WW) VESA(0): remove MTRR 0 - 1000
(II) VESA(0): Total Memory: 1024 64KB banks (65536kB)
(EE) VESA(0): No matching modes
(WW) VESA(0): remove MTRR 0 - 1000
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R7/lib/modules//libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R7/lib/modules//libvbe.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
Section "Device"
Identifier "Card0"
Driver "via"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # <i>
#Option "ActiveDevice" # [<str>]
#Option "LCDDualEdge" # [<bool>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # <i>
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DRIXINERAMA" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "ExaNoComposite" # [<bool>]
Identifier "Card0"
Driver "via"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R7/lib/X11/rgb"
ModulePath "/usr/X11R7/lib/modules"
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
FontPath "/usr/X11R7/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/CID/"
FontPath "/usr/X11R7/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R7/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "cfb"
Load "cfb32"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "mfb"
Load "record"
Load "shadow"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 64.0
VertRefresh 50.0 - 90.0
# HorizSync 31.5 - 48.0
# VertRefresh 59.0 - 75.0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "fr"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse" # wsmouse protocol
Option "Device" "/dev/wsmouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vesa"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "* Generic VESA compatible"
Driver "vesa"
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009
[email protected]:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 702 MB
avail memory = 678 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer,Inc. Aspire 1350 (3A24)
mainbus0 (root)
cpu0 at mainbus0: AMD 686-class, 796MHz, id 0x6a0
cpu0: AMD Powernow! K7 Technology 1716 MHz
cpu0: frequencies available (Mhz): 1188 1320 1452 1584 1716
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 0
LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 0
LNKC: ACPI: Found matching pin for 0.16.INTC at func 2: 0
LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 0
LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 0
LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 9
LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 4
LNKB: ACPI: Found matching pin for 0.7.INTA at func 0: 255
LNKB: ACPI: Found matching pin for 0.8.INTA at func 0: 5
acpi0: SCI interrupting at int 10
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13): aux port
pckbc2: irq 12
LPTB (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
FIR (NSC6001) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpitz0 at acpi0 (THRM): critical 87.0C passive 52.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.8
pms0: Up/down buttons, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3205 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb168 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x7205 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
cbb0 at pci0 dev 7 function 0: vendor 0x104c product 0xac50 (rev. 0x02)
fwohci0 at pci0 dev 8 function 0: vendor 0x104c product 0x8026 (rev. 0x00)
fwohci0: interrupting at irq 5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:15:96:b9
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci0: interrupting at irq 4
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 3: vendor 0x1106 product 0x3104 (rev. 0x82)
ehci0: interrupting at irq 11
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3177 (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 9
auvia0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit ADC,
Realtek 3D
auvia0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
vendor 0x1106 product 0x3068 (miscellaneous communications, revision 0x80) at
pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 4
vr0: Ethernet address: 00:c0:9f:36:30:2c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 8
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x21000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 5
cardslot0 at cbb0
pcmcia0 at cardslot0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
acpiacad0: AC adapter online.
wd0 at atabus0 drive 0: <IBM-DBCA-206480>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Slimtype COMBO LSC-24082K, , JKQ1> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
_______________________________________________
xorg mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/xorg
