I have two configurations running 4.1.0 on a Matrox Millenium under RedHat Linux, both with 2.4.x kernels. On the RedHat 6.1 system, which is running XFree86 binaries downloaded from xfree86.org, the DDC Monitor info recognizes the display with no problems. (II) MGA(0): DDC Monitor info: 0x857e538 (II) MGA(0): Manufacturer: VSC Model: 3651 Serial#: 11820 (II) MGA(0): Year: 1997 Week: 6 (II) MGA(0): EDID Version: 1.0 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) MGA(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) MGA(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30 (II) MGA(0): Gamma: 2.54 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) MGA(0): redX: 0.635 redY: 0.333 greenX: 0.280 greenY: 0.595 (II) MGA(0): blueX: 0.152 blueY: 0.063 whiteX: 0.283 whiteY: 0.298 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): 1152x870@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: .... on the other system, which is running the 7.1.94 (roswell beta 2) version which has binaries created by RedHat, all I see in this section is: (II) MGA(0): DDC Monitor info: (nil) (II) MGA(0): end of DDC Monitor info And the display resolution is 800x600. XF86Config is the same in both cases. I'd appreciate any pointers on how I could go about debugging this problem -- Geoffrey Leach Sent to you by the Sylpheed user agent from a Linux Helix/Gnome Desktop _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
