Am Donnerstag, 15. November 2001 13:06 schrieb Lars Silv�n: > I have tryed to get the 1600x1200 resolution on a PLE133 chipset. > The monitor I'm using is a NEC FE950+: hor freq 31-96kHz vert freq > 50-160Hz. I have tried both the vesa and trident (the chip is suposed to > have the trident blade3D integrated) driver but non of these works. It just > wont take the 1600x1200 but 1280x1024 works fine. trident craches after any > valid ctrl-alt-* key press and has to be restarted; this is no problems for > vesa. > I would be glad if anyone has any suggestions. Other drivers or any > special settings that I could try. I have a used the debian wody dist to > install xfree86-4 and also tried xf86config and some editing of the > XF86Config-4 file. 1600x1200 works fine on win2k so the HW is capable of > doing it. > > Thanks > Lars > > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert
Maybe somethings happen in your XF86Config-4 , Get your Monitor and Videocard Manual and search for DDC compliance. If both have this you can add in the Module Section Load "ddc" and XFree86 gets the needed Modelines for all possible Resolutions so it works with your Hardware. _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
