Thanks for the suggestion. But I already had "load ddc" in the module section. Both monitor and chip supports DDC according to the documentation.
I have found some docs that describes my HW: The graphics is done by the VT8601 chip: http://bongo.a.se/~lars/xfree86/dspm601.pdf Monitor: http://bongo.a.se/~lars/xfree86/fe_950plus_e.pdf Used configure file: http://bongo.a.se/~lars/xfree86/XF86Config-4 xfree log: http://bongo.a.se/~lars/xfree86/XFree86.0.log I would be very glad if anyone could give me any help on this. For instance where can I find docs about the vesa driver and resolutions supported by the this driver. regards Lars root wrote: > Am Donnerstag, 15. November 2001 13:06 schrieb Lars Silv�n: > >>I have tryed to get the 1600x1200 resolution on a PLE133 chipset. >>The monitor I'm using is a NEC FE950+: hor freq 31-96kHz vert freq >>50-160Hz. I have tried both the vesa and trident (the chip is suposed to >>have the trident blade3D integrated) driver but non of these works. It just >>wont take the 1600x1200 but 1280x1024 works fine. trident craches after any >>valid ctrl-alt-* key press and has to be restarted; this is no problems for >>vesa. >>I would be glad if anyone has any suggestions. Other drivers or any >>special settings that I could try. I have a used the debian wody dist to >>install xfree86-4 and also tried xf86config and some editing of the >>XF86Config-4 file. 1600x1200 works fine on win2k so the HW is capable of >>doing it. >> >>Thanks >> Lars >> >>_______________________________________________ >>Xpert mailing list >>[EMAIL PROTECTED] >>http://XFree86.Org/mailman/listinfo/xpert >> > > > Maybe somethings happen in your XF86Config-4 , Get your Monitor and Videocard > Manual and search for DDC compliance. > > If both have this you can add in the Module Section > > Load "ddc" > > and XFree86 gets the needed Modelines for all possible Resolutions so it > works with your > Hardware. > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert > > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
