On Wed, 12 Dec 2001, Joe Carnes wrote:
> ok.. I added the module directory like so:
>
> JoeLinux:/usr/lib/modules/drivers$ ls
> mga_hal_drv.o
>
> I've even stuck the file in /usr/lib/modules just to be safe.
>
> and in my XF86Config, I have the following lines:
>
> ModulePath "/usr/lib/modules"
It is more usual to put the hal module /usr/X11R6/lib/modules/drivers/
so as not to confuse it with the kernel modules, but I don't see a
problem with that.
I do note that the DDC probes find the same monitor serial number
on both heads, which suggests the the driver isn't talking to both heads
(although I can't state categorically that DDC works for the second head).
I'm too confused by lines like
Screen 0 "Screen1"
Screen 1 "Screen2" RightOf "Screen1"
(in some places screens count from 0 and others from 1, and then the
mga driver needs another screen line to indicate heads :-( )
to be clear whether you have got this right.
I haven't had my hands on a G series Matrox for several months,
so can't suggest anything else.
--
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
