On Fri, 4 Jan 2002, Hannes Eriksson wrote:
> Hello,
> I have recently got this digital flat panel to work with a Radeon VE
> (QY) in xf4.1.99, using a quite unusual approach.
>
> The problem is that the panel is not getting the timings it requires,
> even though the X server successfully reads the EDID info. To get it to
> work I hav to boot up with the panel connected to the DVI connector on
> the Radeon VE, then disconnect it before starting the X server, so that
> the EDID cannot be read (just turning the panel off doesn't help), and
> then connect it after the server has come up.
> Is there a way, like in nvidias binary-only driver, to disable EDID that
> I've missed?
Option "noDDC"
should work. I put this in the monitor section,
but I don't think that it has to go there.
Option "noVBE"
might work too.
--
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
