On Sat, 5 Jan 2002, Kevin Brosius wrote:
> > > It could also be that your video card has an interrupt line that is
> > > assigned (check in BIOS).
> The BIOS doesn't contain this setting? (I've yet to meet a laptop
> without a BIOS setup.)
I *have* a BIOS setup. I don't have any settings for much, including
VGA IRQ assignment.
FWIW:
----
Bus 0, device 8, function 0:
VGA compatible controller: S3 Inc. ViRGE/MX (rev 6).
Master Capable. No bursts. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xc0000000 [0xc3ffffff].
----
> If you want to really cut back the virge driver, try the following;
<snip>
I did all that already. No difference.
> If you do run this, I'd be interested in seeing the log
> file again. Don't know if anyone else cares, so feel free to send it to
> me privately.
Will do.
-Kenny
--
Kenneth R. Crudup Sr. SW Engineer, Scott County Consulting, Washington, D.C.
Home1: PO Box 914 Silver Spring, MD 20910-0914 [EMAIL PROTECTED]
Home2: 38010 Village Cmn. #217 Fremont, CA 94536-7525 (510) 745-0101
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
