On Thu, 7 Feb 2002, FITZSIMMONS THOMAS wrote: > > > I'm trying to get X to output to a Hantarex MTC 9000 arcade monitor.
> > > With the attached configuration, I'm getting a horizontal band > > > covering about 1/5th of the screen's height that > > > displays perfectly, and that seems to follow the vertical location that > > > the mouse cursor would be at, except that the cursor doesn't display. > > > Above this band, the screen is blackish, with thin vertical lines, and > > > below the band, it displays alternating light and dark vertical stripes. > > > When I specify the SWCursor option to the ati driver, the entire screen > > > displays > > > only the alternating light and dark vertical stripes. > > > Any ideas what is wrong? > > You say 15kHz, yet your XF86Config clamps hsync to 15.125-16.125, and the > > mode you're using syncs at 15.6kHz. That might be a difference that's > > significant enough. Try an hsync range of 14.75 - 16.25, and a dot clock > > of 9.6 MHz. > Sorry, I should have been more specific. The monitor is actually rated > for 15.625+/-0.5kHz horizontal, 45-65Hz vertical, -3dB at 12MHz. > I tried your suggestion, but got the same results. Any other suggestions? > Thanks for your reply, Let's try to isolate the problem. Try Chipset "ativga" in the device section. Marc. +----------------------------------+-----------------------------------+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax: 1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +-----------------------------------+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply | | CANADA | | +----------------------------------+-----------------------------------+ XFree86 Core Team member. ATI driver and X server internals. _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
