On Thu, 7 Feb 2002, Marc Aurele La France wrote:

> On Thu, 7 Feb 2002, FITZSIMMONS  THOMAS wrote:
>
> > > > I'm trying to get X to output to a Hantarex MTC 9000 arcade monitor.
>
> > > > With the attached configuration, I'm getting a horizontal band
> > > > covering about 1/5th of the screen's height that
> > > > displays perfectly, and that seems to follow the vertical location that
> > > > the mouse cursor would be at, except that the cursor doesn't display.
>
> > > > Above this band, the screen is blackish, with thin vertical lines, and
> > > > below the band, it displays alternating light and dark vertical stripes.
>
> > > > When I specify the SWCursor option to the ati driver, the entire screen
> > > > displays
> > > > only the alternating light and dark vertical stripes.
>
> > > > Any ideas what is wrong?
>
> > > You say 15kHz, yet your XF86Config clamps hsync to 15.125-16.125, and the
> > > mode you're using syncs at 15.6kHz.  That might be a difference that's
> > > significant enough.  Try an hsync range of 14.75 - 16.25, and a dot clock
> > > of 9.6 MHz.
>
> > Sorry, I should have been more specific.  The monitor is actually rated
> > for 15.625+/-0.5kHz horizontal, 45-65Hz vertical, -3dB at 12MHz.
>
> > I tried your suggestion, but got the same results.  Any other suggestions?
> > Thanks for your reply,
>
> Let's try to isolate the problem.  Try Chipset "ativga" in the device
> section.

It works perfectly now!  Thanks so much.  I'm curious; what's the
explanation?

Tom

> Marc.
>
> +----------------------------------+-----------------------------------+
> |  Marc Aurele La France           |  work:   1-780-492-9310           |
> |  Computing and Network Services  |  fax:    1-780-492-1729           |
> |  352 General Services Building   |  email:  [EMAIL PROTECTED]          |
> |  University of Alberta           +-----------------------------------+
> |  Edmonton, Alberta               |                                   |
> |  T6G 2H1                         |     Standard disclaimers apply    |
> |  CANADA                          |                                   |
> +----------------------------------+-----------------------------------+
> XFree86 Core Team member.  ATI driver and X server internals.
>
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
>

_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert

Reply via email to