On Fri, 29 Mar 2002, Peter Leftwich wrote:
>
>
> {To whomever helps me first/best, I decree "name your PayPal $$FEE$$ !!"}
>
>
> I've attached two files, one is relevant dmesg output (sorted in order of
> video then keyboard then mouse stuff) and the other is the default output
> file "XF86Config.new" which was created by the "XFree86 -configure" command.
>
> All I wish for are these three (3) things, from least to highest priority:
>
> (1) Is it possible to use SVGA (blanktime, screen_saver.ko modules) in
> syscons/console?
Have no idea what you are talking about.. What is syscons ?
>
> (2) What changes must I make to the default XF86Config.new file to use
> atkbd and /dev/sysmouse (ums0) instead of "keyboard" and "/dev/mouse?"
Ahh.. it looks like you are running BSD, right ?
Try:
Section "InputDevice"
Identifier "mouse0"
Driver "mouse"
Option "Protocol" "sysmouse"
Option "Device" "/dev/sysmouse"
EndSection
>
> (3) What lines must be *added* to the default XF86Config.new file to use a
> DefaultDepth of 16 (or 24) and a DefaultResolution of 800x600, so that
> XFree86 will work with my ATI All-in-Wonder 128 16mb AGP video card and
> Dell M781p monitor (supposed ranges are hscan 30-85kHz, vscan 50-160kHz,
> and optimal preset is apparently "1024x768 @ 85Hz")??
In the screen section add
DefaultDepth 16
just before first 'SubSection "Display"'
Change 16 bit subsection so it looks like:
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
If you see monitor not syncing to the signal (though
/var/log/XFree86.0.log shows everything is fine) add
Option "composite_sync" "off"
to the end of 'Section "Device"'. If this does not help change "off" to
"on".
Also, take a look at http://gatos.sf.net/ Note: binary drivers might not
(will likely not) work for BSD, you will need to compile from source.
>
> I really require X. I am exasperated. Someone. Please-- Help me and
> take my $loot$ ??
>
If this helps please consider contributing to EFF.
best
Vladimir Dergachev
> --
> Peter Leftwich
> President & Founder
> Video2Video Services
> Box 13692, La Jolla, CA, 92039 USA
> +1-413-403-9555
>
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
