On Wed, 3 Apr 2002, Vladimir Dergachev wrote:
> On Fri, 29 Mar 2002, Peter Leftwich wrote:
> > {To whomever helps me first/best, I decree "name your PayPal $$FEE$$ !!"}
> > I've attached two files, one is relevant dmesg output (sorted in order of video
>then keyboard then mouse stuff) and the other is the default output file
>"XF86Config.new" which was created by the "XFree86 -configure" command.
> > All I wish for are these three (3) things, from least to highest priority:
> > (1) Is it possible to use SVGA (blanktime, screen_saver.ko modules) in
>syscons/console?
> Have no idea what you are talking about.. What is syscons ?
man syscons
> > (2) What changes must I make to the default XF86Config.new file to use atkbd and
>/dev/sysmouse (ums0) instead of "keyboard" and "/dev/mouse?"
> Ahh.. it looks like you are running BSD, right ?
I am running FreeBSD 4.5-RELEASE
> Try:
> Section "InputDevice"
> Identifier "mouse0"
> Driver "mouse"
> Option "Protocol" "sysmouse"
> Option "Device" "/dev/sysmouse"
> EndSection
Tried it. Nata.
> > (3) What lines must be *added* to the default XF86Config.new file to use a
>DefaultDepth of 16 (or 24) and a DefaultResolution of 800x600, so that XFree86 will
>work with my ATI All-in-Wonder 128 16mb AGP video card and Dell M781p monitor
>(supposed ranges are hscan 30-85kHz, vscan 50-160kHz, and optimal preset is
>apparently "1024x768 @ 85Hz")??
> In the screen section add
> DefaultDepth 16
> just before first 'SubSection "Display"'
> Change 16 bit subsection so it looks like:
> SubSection "Display"
> Depth 16
> Modes "800x600"
> EndSubSection
I don't think this is where the problem is... but maybe?
> If you see monitor not syncing to the signal (though /var/log/XFree86.0.log shows
>everything is fine) add
> Option "composite_sync" "off"
Interesting... :)
> to the end of 'Section "Device"'. If this does not help change "off" to "on".
> Also, take a look at http://gatos.sf.net/ Note: binary drivers might not (will
>likely not) work for BSD, you will need to compile from source.
> > I really require X. I am exasperated. Someone. Please-- Help me and take my
>$loot$ ??
> If this helps please consider contributing to EFF.
> best
> Vladimir Dergachev
It didn't help but I am considering contributing to EFF (good people)! :)
--
Peter Leftwich
President & Founder
Video2Video Services
Box 13692, La Jolla, CA, 92039 USA
+1-413-403-9555
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
