Hi folks, recently, I felt like using 1152x864 on my 17" Eizo CRT. Unfortunately, the standard VESA mode at that resolution only offers a refresh rate of 75 Hz, which causes headache :/
So I tried to build a modeline for my CRT. However, with all modeline generation tools I found on the web, I encountered one problem or another. With some, I got an error message like this: "Screens found, but none has a usable configuration". I don't know how to fix that, the refresh rates etc I gave the tool that computed the modeline were all correct. The other main problem I have is the following: When I move the mouse to the left edge of the display, a small grey bar appears right at the mouse, which is visible all across the screen. It's as high as the mouse pointer. I hope that's a problem I can fix optimizing the modeline. However, I haven't found info on how to do that in the XFree Timing HOWTO. Could someone please point me into the right direction? Would be great if I could use that modeline, as it gives me a nice refresh rate :)) Modeline "1024x768" 129.69 1024 1072 1312 1408 768 770 782 808 #114Hz Modeline "1152x864" 129.13 1152 1200 1440 1536 864 866 878 904 #93Hz (Same problem with both of them). Any help would be greatly appreciated. Regards, Tilman ps: If you reply, please CC me, as I'm not subscribed to the list, thanks. -- Get GKrellM Newsticker @ http://gk-newsticker.sourceforge.net _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
