Hi Xperts,
I can't seem to get my Trio64V2 card working correctly under 4.2, even
though it is said to be supported. My problems are as follows: If I use
ctrl+alt+numeric +/- to change resolution, my machines freezes completely,
no VT switch, no nothing. Also if I change from X to another VT with
ctrl+alt+Fx and then back again, the display gets unreadable, and stays
that way. It looks a bit like the "war-of-the-ants" you get when your TV
isn't tuned for a cannel. I have experineced these problems under both
FreeBSD and Linux.
If these are known problems, I apologize, but I haven't been able to find
any info at all about S3Trio cards and 4.2, apart from that they are
supposed to work.
Any help would be greatly appreciated. (Below is my XF86Config.)
/Joakim
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 31.5
HorizSync 35.2 - 35.2
HorizSync 35.5 - 35.5
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
Identifier "Card0"
Driver "s3"
VendorName "S3"
BoardName "Trio64V2/DX or /GX"
ChipSet "Trio32/64"
BusID "PCI:0:20:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
