Well, I think I set up my XF86Config-4 to do what you suggested. I am including it with this email. However, X crashes on me when I try to invoke startx (The XFree86.0.log file is at http://www.senfamily.org/xfree/XFree86.0.log).
If I change the screen directive for the "Card1" device from "Screen 1" to "Screen 0", I get a display on the external CRT (while the LCD is just backlit with a blank screen). Any ideas? DS Michel Wrote: On Sun, 2002-07-07 at 20:16, D. Sen wrote: >> I would like to have a 70-80 Hz refresh rate CRT display simultaneously >> with my LCD display on my laptop equipped with the ATI Radeon Mobility >> chipset. This is especially for presentations where I can control my LCD >> screen and have the others watch what I am doing on a bigger screen >> (perhpas even on a projector). I havent been able to figure out how to >> configure my XF86Config-4 to do this. If I set the CrtScreen Option, I >> only get a display on the external monitor. If I dont, then the server >> scans the LCD screen for clock rates and the best I can achieve on the >> external display is a refresh rate of around 53 Hz. > > > Set up multihead with two device sections containing the Screen > directive and two screen sections. Make the screens overlap in the > layout section if you want mirroring.
