> Michel Daenzer wrote: > On Mon, 2002-07-08 at 17:24, D. Sen wrote: > > >> > >> Well, I think I set up my XF86Config-4 to do what you suggested. I > am including it with this email. However, X crashes on me when I try to > invoke startx (including /var/log/XFree86.0.log as well). > >> > >> If I change the screen directive for the "Card1" device from "Screen > 1" to "Screen 0", I get a display on the external CRT (the LCD is just > backlit with a blank screen). > >> > >> Any ideas? > > > >[...] > > > >> (II) RADEON(0): Shutting down Xvideo subsystems > >> (II) RADEON(0): membase=0xe8000000 memsize=0x04000000 > > >> gpSize=0x00000008 > > > >This looks like you're using GATOS drivers, does the crash occur with > >stock XFree86 drivers? >
Specifying the "ati" driver as opposed to the "radeon" driver does work better. X isnt crashing anymore. I am also getting a display on both the LCD and the CRT screen. However, I dont seem to be able to change the refresh rate on the CRT. I have tried quite a few different modelines but the refresh rate doesnt change from the 50 Hz (It seems to pick the modeline from the bios settings for the clock rate, etc) The new XFree86.0.Log is at http://cafebleu.no-ip.org:9135/xfree/XFree86.0.log_take2 _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
