On Mon, 2002-07-15 at 09:20, hy0 wrote:
> >Hmm, with XF86-4.2 I had to use "CrtScreen" to get a display, now I had to
> set:
> >
> > Option "CloneDisplay" "1"
> >
> >Is that the intended way to do it?
> Yes. This option is supposed to be on by default. Since that part of code is
> not well tested, it's default off for now.
> Anyone who wants to mirror the 2nd display should turn on this option.
>
> >Without either one, I don't get a display on my CRT (which is my only
> >monitor, somehow the card thinks I have a flat panel which I don't have).
> It's strange. Are you using one of mibile cards (M6/M7)? From what I know,
> only mobile cards for internal qualification behave like this. The retail
> mobile cards are usually built into a laptop which has a LCD connected.
No, the card is an OEM Radeon 7500, "lspci -v" gives this:
--- 8< ---
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon 7500 QW
(prog-if 00 [VGA])
Subsystem: Unknown device 1787:2709
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at d8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at e1000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
--- >8 ---
Nils
--
Nils Philippsen / Berliner Stra�e 39 / D-71229 Leonberg //
+49.7152.209647
[EMAIL PROTECTED] / [EMAIL PROTECTED] / [EMAIL PROTECTED]
PGP fingerprint: C4A8 9474 5C4C ADE3 2B8F 656D 47D8 9B65 6951 3011
Ever noticed that common sense isn't really all that common?
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
