On Wed, 30 Oct 2002, Yongming Wei wrote: > Thanks, I works after change VertRefresh to 60, but > after that, my monitor begins to flicker, and I found > the dotrate degrade from 75 to 60, maybe it is the > reason of this problem. > > How to avoid it?
60 Hz Is expected to flicker on a CRT, but usually not on an LCD. Which LCD panel is this? Mark. > > Regards, > > --- Mark Vojkovich <[EMAIL PROTECTED]> wrote: > > On Tue, 29 Oct 2002, Yongming Wei wrote: > > > > > I changed my CRT to LCD, it works well in my > > redhat > > > 8.0, but I found a problem: the manual for this > > LCD > > > says the refresh rate is recommended set to 60HZ > > at > > > 1024*768, but XFree86 will automaticly search for > > the > > > highest refresh rate possiblely which is 75HZ in > > my > > > box. > > > > > > Can somebody point me the way to change the > > refresh > > > rate to 60HZ? > > > > > > > Just specify in the Section "Monitor" of the > > XF86Config file: > > > > VertRefresh 60 > > > > and you'll only get 60 Hz modes. > > > > > > Mark. > > _______________________________________________ > > Xpert mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xpert > > > __________________________________________________ > Do you Yahoo!? > HotJobs - Search new jobs daily now > http://hotjobs.yahoo.com/ > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert