Try the CVS and let me know how you get on. Alan.
On Wed, Nov 13, 2002 at 12:13:28 -0500, Greg Stark wrote: > > I tried an old graphics card that was lying around and ran into a problem with > the glint driver. This old message from January seems to indicate it's been > noticed before but I guess the problem is still present in 4.2.1 > > I tried attachign the log file but that put the message over the limit for the > list, so here's an excerpt: > > (**) GLINT(2): Depth 16, (--) framebuffer bpp 16 > (==) GLINT(2): RGB weight 565 > (==) GLINT(2): Default visual is TrueColor > (==) GLINT(2): Using gamma correction (1.0, 1.0, 1.0) > (==) GLINT(2): Using HW cursor > (--) GLINT(2): Not using Linux framebuffer device > (--) GLINT(2): Chipset: "ti_pm" > (--) GLINT(2): Linear framebuffer at 0xEE000000 > (--) GLINT(2): MMIO registers at 0xEF000000 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) GLINT(2): Initializing int10 > (II) Truncating PCI BIOS Length to 32768 > (--) GLINT(2): VideoRAM: 4096 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Reloading /usr/X11R6/lib/modules/libramdac.a > (==) GLINT(2): Write-combining range (0xee000000,0x400000) > (--) GLINT(2): Cannot determine IBM RAMDAC type, aborting > (II) UnloadModule: "glint" > (II) UnloadModule: "ramdac" > (II) UnloadModule: "int10" > (II) do I need RAC? Yes, I do. > (II) LoadModule: "rac" > > The lspci output is attached, the relevant entry: > > 00:0d.0 VGA compatible controller: Texas Instruments TVP4010 [Permedia] (rev 01) >(prog-if 00 [VGA]) > Subsystem: 3DLabs: Unknown device 0096 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ef000000 (32-bit, non-prefetchable) [disabled] [size=128K] > Region 1: Memory at ee800000 (32-bit, non-prefetchable) [disabled] [size=8M] > Region 2: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=8M] > Expansion ROM at ed000000 [disabled] [size=64K] > > > > Send me the output of 'lspci -v' and a copy of your > > /var/log/XFree86.0.log too. > > > > Alan. > > > > On Wed, Jan 09, 2002 at 06:05:18AM +1100, David Balnaves wrote: > > > Hi, > > > I dont think there is an easy answer to this problem. I have a Texas > > > Instruments TVP4010 and am trying to get it working under X 4.1.0. I seem > > > to be getting the problem that it can't identify the RAMDAC, or that the > > > RAMDAC is an IBM 525 and its not supported. > > > > > > I know that the RAMDAC is a TVP3026 (or at least thats what I have on my > > > board) and from the look of it, the TVP4010 is manufactured only with a > > > TVP3026 (from looking at the data sheet). > > > > > > The error says the first time around that it cant determine the IBM RAMDAC > > > and the second time and forever after it says its an IBM 525 which isn't > > > supported. I also get blue text in my console screen, and other colors no > > > longer work. > > > > > > If anybody can give advice on this problem (besides buy a new video > > > card) or would like a copy of the data sheet. Let me know. > > > > > > Cheers, > > > David Balnaves > > 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort+ >SERR- <PERR- > Latency: 32 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1 > > 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) >(prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > Memory behind bridge: e4000000-e7ffffff > Prefetchable memory behind bridge: e8000000-e9ffffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+ > > 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 0 > > 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 >[Master]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Region 4: I/O ports at f000 [size=16] > > 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 >[UHCI]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin D routed to IRQ 10 > Region 4: I/O ports at 9000 [size=32] > > 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin ? routed to IRQ 9 > > 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) > Subsystem: D-Link System Inc DE-528 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at 9400 [size=32] > > 00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c) > Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (2500ns min, 2500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at 9800 [size=128] > Region 1: Memory at ef021000 (32-bit, non-prefetchable) [size=128] > Expansion ROM at ea000000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) > Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ ><MAbort+ >SERR- <PERR- > Latency: 32 (3000ns min, 32000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at 9c00 [size=64] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0c.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 >GT] (rev 41) (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Region 0: Memory at eb000000 (32-bit, non-prefetchable) [disabled] [size=16M] > Region 1: I/O ports at a000 [disabled] [size=256] > Region 2: Memory at ef020000 (32-bit, non-prefetchable) [disabled] [size=4K] > Expansion ROM at ec000000 [disabled] [size=128K] > > 00:0d.0 VGA compatible controller: Texas Instruments TVP4010 [Permedia] (rev 01) >(prog-if 00 [VGA]) > Subsystem: 3DLabs: Unknown device 0096 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ef000000 (32-bit, non-prefetchable) [disabled] [size=128K] > Region 1: Memory at ee800000 (32-bit, non-prefetchable) [disabled] [size=8M] > Region 2: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=8M] > Expansion ROM at ed000000 [disabled] [size=64K] > > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) >(prog-if 00 [VGA]) > Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SDRAM > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (4000ns min, 8000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=16K] > Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=8M] > Expansion ROM at <unassigned> [disabled] [size=64K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [f0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1 > > > -- > greg _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
