Try with the current CVS. Alan.
On Tue, Nov 12, 2002 at 06:16:53PM -0500, Greg Stark wrote: > > I tried an old graphics card that was lying around and ran into a problem with > the glint driver. This old message from January seems to indicate it's been > noticed before but I guess the problem is still present in 4.2.1 > > I've attached the log file but it has precisely the same message: > "Cannot determine IBM RAMDAC type, aborting" > > The lspci output is also attached, the relevant entry: > > 00:0d.0 VGA compatible controller: Texas Instruments TVP4010 [Permedia] (rev 01) >(prog-if 00 [VGA]) > Subsystem: 3DLabs: Unknown device 0096 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ef000000 (32-bit, non-prefetchable) [disabled] [size=128K] > Region 1: Memory at ee800000 (32-bit, non-prefetchable) [disabled] [size=8M] > Region 2: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=8M] > Expansion ROM at ed000000 [disabled] [size=64K] > > > > Send me the output of 'lspci -v' and a copy of your > > /var/log/XFree86.0.log too. > > > > Alan. > > > > On Wed, Jan 09, 2002 at 06:05:18AM +1100, David Balnaves wrote: > > > Hi, > > > I dont think there is an easy answer to this problem. I have a Texas > > > Instruments TVP4010 and am trying to get it working under X 4.1.0. I seem > > > to be getting the problem that it can't identify the RAMDAC, or that the > > > RAMDAC is an IBM 525 and its not supported. > > > > > > I know that the RAMDAC is a TVP3026 (or at least thats what I have on my > > > board) and from the look of it, the TVP4010 is manufactured only with a > > > TVP3026 (from looking at the data sheet). > > > > > > The error says the first time around that it cant determine the IBM RAMDAC > > > and the second time and forever after it says its an IBM 525 which isn't > > > supported. I also get blue text in my console screen, and other colors no > > > longer work. > > > > > > If anybody can give advice on this problem (besides buy a new video > > > card) or would like a copy of the data sheet. Let me know. > > > > > > Cheers, > > > David Balnaves > > > XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 [EMAIL PROTECTED]) / X >Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 3 September 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.18 i686 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.1.log", Time: Tue Nov 12 18:12:49 2002 > (==) Using config file: "/etc/X11/XF86Config-4" > (++) ServerLayout "test" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Sony" > (**) | |-->Device "G400" > (**) |-->Screen "Second Screen" (1) > (**) | |-->Monitor "GVC" > (**) | |-->Device "ATI" > (**) |-->Screen "Third Screen" (2) > (**) | |-->Monitor "GVC" > (**) | |-->Device "TVP4010" > (**) |-->Input Device "Generic Keyboard" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Generic Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/X11R6/lib/X11/fonts/sharefont/" does not exist. > Entry deleted from font path. > (**) FontPath set to >"unix/:7101,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 8 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 > (II) PCI: 00:09:0: chip 10ec,8029 card 1186,0300 rev 00 class 02,00,00 hdr 00 > (II) PCI: 00:0a:0: chip 10b7,9200 card 10b7,1000 rev 6c class 02,00,00 hdr 00 > (II) PCI: 00:0b:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr 00 > (II) PCI: 00:0c:0: chip 1002,4754 card 0000,0000 rev 41 class 03,00,00 hdr 00 > (II) PCI: 00:0d:0: chip 104c,3d04 card 0000,0000 rev 01 class 03,00,00 hdr 00 > (II) PCI: 01:00:0: chip 102b,0525 card 102b,0338 rev 04 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set) > (II) Bus 1 I/O range: > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B] > (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI: (0:12:0) ATI Mach64 GT rev 65, Mem @ 0xeb000000/24, 0xef020000/12, I/O @ >0xa000/8, BIOS @ 0xec000000/17 > (--) PCI: (0:13:0) Texas Instruments Permedia rev 1, Mem @ 0xef000000/17, >0xee800000/23, 0xee000000/23, BIOS @ 0xed000000/16 > (--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe8000000/25, 0xe4000000/14, >0xe5000000/23 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [1] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [2] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [3] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [4] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [5] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [6] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [7] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [8] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > (II) Inactive PCI resource ranges: > [0] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [1] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [2] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [3] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [4] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [5] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [6] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [7] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [1] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [2] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [3] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [4] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [5] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [6] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [7] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [8] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > (II) Inactive PCI resource ranges after removing overlaps: > [0] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [1] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [2] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [3] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [4] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [5] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [6] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [7] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [8] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [9] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [10] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [11] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [12] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [13] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [14] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [15] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [16] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [20] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [21] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.1.10 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font FreeType > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mga" > (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o > (II) Module mga: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.1.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "ati" > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 6.4.8 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "glint" > (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o > (II) Module glint: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, > mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400, > mgag550 > (II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP), > ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), > ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI), > ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), > ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP), > ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP), > ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP), > ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP), > ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP), > ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP) > (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4, > pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta > (II) Primary Device is: PCI 01:00:0 > (--) Chipset mgag400 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [8] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [9] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [10] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [11] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [12] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [13] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [14] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [15] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [16] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [20] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [21] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > (II) ATI: Candidate "Device" section "ATI". > (II) ATI: Shared PCI/AGP Mach64 in slot 0:12:0 detected. > (II) ATI: Shared PCI/AGP Mach64 in slot 0:12:0 assigned to active "Device" section >"ATI". > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [8] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [9] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [10] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [11] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [12] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [13] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [14] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [15] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [16] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [20] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [21] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > (II) Loading sub module "atimisc" > (II) LoadModule: "atimisc" > (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o > (II) Module atimisc: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 6.4.8 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (--) Chipset ti_pm found > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [8] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [9] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [10] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [11] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [12] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [13] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [14] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [15] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [16] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [20] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [21] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [22] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [25] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [26] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [27] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [28] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > [33] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [34] 1 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Setting vga for screen 1. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (**) MGA(0): Depth 16, (--) framebuffer bpp 16 > (==) MGA(0): RGB weight 565 > (II) Loading sub module "mga_hal" > (II) LoadModule: "mga_hal" > (WW) Warning, couldn't open module mga_hal > (II) UnloadModule: "mga_hal" > (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) > (II) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead > (--) MGA(0): Chipset: "mgag400" > (==) MGA(0): Using AGP 1x mode > (--) MGA(0): Linear framebuffer at 0xE8000000 > (--) MGA(0): MMIO registers at 0xE4000000 > (--) MGA(0): Pseudo-DMA transfer window at 0xE5000000 > (==) MGA(0): BIOS at 0xC0000 > (--) MGA(0): Video BIOS info block at offset 0x07A80 > (WW) MGA(0): Video BIOS info block not detected! > (II) MGA(0): MGABios.RamdacType = 0x0 > (WW) MGA(0): Failed to set up write-combining range (0xe8000000,0x2000000) > (--) MGA(0): VideoRAM: 16384 kByte > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.5 > (==) MGA(0): Write-combining range (0xe8000000,0x1000000) > (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) MGA(0): I2C bus "DDC" initialized. > (**) MGA(0): Option "NoDDC1" > (**) MGA(0): Option "NoDDC2" > (II) MGA(0): I2C Monitor info: (nil) > (II) MGA(0): end of I2C Monitor info > > (II) MGA(0): DDC Monitor info: (nil) > (II) MGA(0): end of DDC Monitor info > > (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) > (==) MGA(0): Min pixel clock is 12 MHz > (==) MGA(0): Max pixel clock is 300 MHz > (II) MGA(0): Sony: Using hsync range of 31.50-121.00 kHz > (II) MGA(0): Sony: Using vrefresh range of 48.00-160.00 Hz > (II) MGA(0): Clock range: 12.00 to 300.00 MHz > (--) MGA(0): Has SDRAM > (--) MGA(0): Virtual size is 1600x1200 (pitch 1600) > (**) MGA(0): Default mode "1600x1200": 229.5 MHz, 106.2 kHz, 85.0 Hz > (II) MGA(0): Modeline "1600x1200" 229.50 1600 1664 1856 2160 1200 1201 1204 1250 >+hsync +vsync > (**) MGA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz > (II) MGA(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 >+hsync +vsync > (**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz > (II) MGA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 >+hsync +vsync > (**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) MGA(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 >+hsync +vsync > (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync >+vsync > (**) MGA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D) > (II) MGA(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan >+hsync +vsync > (**) MGA(0): Mode "320x240": 30.0 MHz, 75.0 kHz, 143.1 Hz (D) > (II) MGA(0): Modeline "320x240" 30.00 320 336 384 400 240 244 246 262 doublescan > (**) MGA(0): Mode "352x240": 30.0 MHz, 69.4 kHz, 132.5 Hz (D) > (II) MGA(0): Modeline "352x240" 30.00 352 368 416 432 240 244 246 262 doublescan > (**) MGA(0): Mode "352x280": 30.0 MHz, 69.4 kHz, 115.0 Hz (D) > (II) MGA(0): Modeline "352x280" 30.00 352 368 416 432 280 288 290 302 doublescan > (**) MGA(0): Mode "352x288": 30.0 MHz, 69.4 kHz, 112.0 Hz (D) > (II) MGA(0): Modeline "352x288" 30.00 352 368 416 432 288 296 300 310 doublescan > (==) MGA(0): DPI set to (75, 75) > (II) MGA(0): YDstOrg is set to 0 > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (==) ATI(1): Chipset: "ati". > (**) ATI(1): Depth 16, (--) framebuffer bpp 16 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) Truncating PCI BIOS Length to 49152 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/X11R6/lib/modules/libvbe.a > (II) ATI(1): VESA BIOS detected > (II) ATI(1): VESA VBE Version 2.0 > (II) ATI(1): VESA VBE Total Mem: 4096 kB > (II) ATI(1): VESA VBE OEM: ATI MACH64 > (II) ATI(1): VESA VBE OEM Software Rev: 1.0 > (II) ATI(1): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) ATI(1): VESA VBE OEM Product: MACH64GT > (II) ATI(1): VESA VBE OEM Product Rev: 01.00 > (II) ATI(1): VESA VBE DDC supported > (II) ATI(1): VESA VBE DDC Level none > (II) ATI(1): VESA VBE DDC transfer in appr. 2 sec. > (II) ATI(1): VESA VBE DDC read failed > (--) ATI(1): ATI 3D Rage II graphics controller detected. > (--) ATI(1): Chip type 4754 "GT", version 1, foundry SGS, class 0, revision 0x01. > (--) ATI(1): PCI bus interface detected; block I/O base is 0xA000. > (--) ATI(1): ATI Mach64 adapter detected. > (!!) ATI(1): For information on using the multimedia capabilities > of this adapter, please see http://gatos.sf.net. > (--) ATI(1): Internal RAMDAC (subtype 1) detected. > (==) ATI(1): RGB weight 565 > (==) ATI(1): Default visual is TrueColor > (==) ATI(1): Using gamma correction (1.0, 1.0, 1.0) > (II) ATI(1): Using Mach64 accelerator CRTC. > (II) ATI(1): Storing hardware cursor image at 0xEB3FFC00. > (II) ATI(1): Using 8 MB linear aperture at 0xEB000000. > (!!) ATI(1): Virtual resolutions will be limited to 4095 kB > due to linear aperture size and/or placement of hardware cursor image area. > (II) ATI(1): Using Block 0 MMIO aperture at 0xEF020400. > (II) ATI(1): Using Block 1 MMIO aperture at 0xEF020000. > (==) ATI(1): Write-combining range (0xeb000000,0x400000) > (II) ATI(1): MMIO write caching enabled. > (--) ATI(1): 4096 kB of SDRAM (1:1) detected (using 4095 kB). > (WW) ATI(1): Cannot shadow an accelerated frame buffer. > (--) ATI(1): Internal programmable clock generator detected. > (--) ATI(1): Reference clock 157.5/11 (14.318) MHz. > (II) ATI(1): GVC: Using hsync range of 28.00-60.00 kHz > (II) ATI(1): GVC: Using vrefresh range of 43.00-90.00 Hz > (II) ATI(1): Maximum clock: 170.00 MHz > (II) ATI(1): Not using default mode "1024x768" (hsync out of range) > (II) ATI(1): Not using default mode "512x384" (hsync out of range) > (II) ATI(1): Not using default mode "1152x864" (hsync out of range) > (II) ATI(1): Not using default mode "576x432" (hsync out of range) > (II) ATI(1): Not using default mode "1280x960" (hsync out of range) > (II) ATI(1): Not using default mode "640x480" (hsync out of range) > (II) ATI(1): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(1): Not using default mode "640x512" (hsync out of range) > (II) ATI(1): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(1): Not using default mode "640x512" (hsync out of range) > (II) ATI(1): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(1): Not using default mode "640x512" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1200" (hsync out of range) > (II) ATI(1): Not using default mode "800x600" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(1): Not using default mode "800x600" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(1): Not using default mode "800x600" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(1): Not using default mode "800x600" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(1): Not using default mode "800x600" (hsync out of range) > (II) ATI(1): Not using default mode "1792x1344" (insufficient memory for mode) > (II) ATI(1): Not using default mode "896x672" (hsync out of range) > (II) ATI(1): Not using default mode "1792x1344" (insufficient memory for mode) > (II) ATI(1): Not using default mode "896x672" (hsync out of range) > (II) ATI(1): Not using default mode "1856x1392" (insufficient memory for mode) > (II) ATI(1): Not using default mode "928x696" (hsync out of range) > (II) ATI(1): Not using default mode "1856x1392" (insufficient memory for mode) > (II) ATI(1): Not using default mode "928x696" (hsync out of range) > (II) ATI(1): Not using default mode "1920x1440" (insufficient memory for mode) > (II) ATI(1): Not using default mode "960x720" (hsync out of range) > (II) ATI(1): Not using default mode "1920x1440" (insufficient memory for mode) > (II) ATI(1): Not using default mode "960x720" (hsync out of range) > (II) ATI(1): Not using default mode "1400x1050" (hsync out of range) > (II) ATI(1): Not using default mode "700x525" (hsync out of range) > (II) ATI(1): Not using default mode "1400x1050" (hsync out of range) > (II) ATI(1): Not using default mode "700x525" (hsync out of range) > (II) ATI(1): Not using default mode "1600x1024" (hsync out of range) > (II) ATI(1): Not using default mode "800x512" (hsync out of range) > (--) ATI(1): Virtual size is 800x600 (pitch 800) > (**) ATI(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) ATI(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync >+vsync > (==) ATI(1): DPI set to (75, 75) > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Reloading /usr/X11R6/lib/modules/libxaa.a > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Reloading /usr/X11R6/lib/modules/libramdac.a > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Reloading /usr/X11R6/lib/modules/libfb.a > (**) GLINT(2): Depth 16, (--) framebuffer bpp 16 > (==) GLINT(2): RGB weight 565 > (==) GLINT(2): Default visual is TrueColor > (==) GLINT(2): Using gamma correction (1.0, 1.0, 1.0) > (==) GLINT(2): Using HW cursor > (--) GLINT(2): Not using Linux framebuffer device > (--) GLINT(2): Chipset: "ti_pm" > (--) GLINT(2): Linear framebuffer at 0xEE000000 > (--) GLINT(2): MMIO registers at 0xEF000000 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) GLINT(2): Initializing int10 > (II) Truncating PCI BIOS Length to 32768 > (--) GLINT(2): VideoRAM: 4096 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Reloading /usr/X11R6/lib/modules/libramdac.a > (==) GLINT(2): Write-combining range (0xee000000,0x400000) > (--) GLINT(2): Cannot determine IBM RAMDAC type, aborting > (II) UnloadModule: "glint" > (II) UnloadModule: "ramdac" > (II) UnloadModule: "int10" > (II) do I need RAC? Yes, I do. > (II) LoadModule: "rac" > (II) Loading /usr/X11R6/lib/modules/librac.a > (II) Module rac: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) resource ranges after preInit: > [0] 2 0 0xee000000 - 0xee7fffff (0x800000) MX[B] > [1] 2 0 0xee800000 - 0xeeffffff (0x800000) MX[B] > [2] 2 0 0xef000000 - 0xef01ffff (0x20000) MX[B] > [3] 1 0 0xef020000 - 0xef020fff (0x1000) MS[B] > [4] 1 0 0xeb000000 - 0xebffffff (0x1000000) MS[B] > [5] 0 0 0xe5000000 - 0xe57fffff (0x800000) MX[B] > [6] 0 0 0xe4000000 - 0xe4003fff (0x4000) MX[B] > [7] 0 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B] > [8] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [9] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [10] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [11] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [12] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [13] -1 0 0xef021000 - 0xef02107f (0x80) MX[B] > [14] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [15] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B](B) > [16] -1 0 0xe4000000 - 0xe4003fff (0x4000) MX[B](B) > [17] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B) > [18] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [19] -1 0 0xee000000 - 0xee7fffff (0x800000) MX[B](B) > [20] -1 0 0xee800000 - 0xeeffffff (0x800000) MX[B](B) > [21] -1 0 0xef000000 - 0xef01ffff (0x20000) MX[B](B) > [22] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B) > [23] -1 0 0xef020000 - 0xef020fff (0x1000) MX[B](B) > [24] -1 0 0xeb000000 - 0xebffffff (0x1000000) MX[B](B) > [25] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) > [26] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) > [27] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) > [28] 1 0 0x0000a000 - 0x0000a0ff (0x100) IS[B] > [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [30] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [31] -1 0 0x00009c00 - 0x00009c3f (0x40) IX[B] > [32] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] > [33] -1 0 0x00009400 - 0x0000941f (0x20) IX[B] > [34] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] > [35] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [36] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B) > [37] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [38] 1 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (==) MGA(0): Write-combining range (0xe8000000,0x1000000) > (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (--) MGA(0): 16 DWORD fifo > (==) MGA(0): Default visual is TrueColor > (II) MGA(0): [drm] bpp: 16 depth: 16 > (II) MGA(0): [drm] Sarea 2200+664: 2864 > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmGetBusid returned 'PCI:1:0:0' > drmOpenDevice: minor is 1 > drmOpenDevice: node name is /dev/dri/card1 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 2 > drmOpenDevice: node name is /dev/dri/card2 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 3 > drmOpenDevice: node name is /dev/dri/card3 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 4 > drmOpenDevice: node name is /dev/dri/card4 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 5 > drmOpenDevice: node name is /dev/dri/card5 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 6 > drmOpenDevice: node name is /dev/dri/card6 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 7 > drmOpenDevice: node name is /dev/dri/card7 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 8 > drmOpenDevice: node name is /dev/dri/card8 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 9 > drmOpenDevice: node name is /dev/dri/card9 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 10 > drmOpenDevice: node name is /dev/dri/card10 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 11 > drmOpenDevice: node name is /dev/dri/card11 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 12 > drmOpenDevice: node name is /dev/dri/card12 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 13 > drmOpenDevice: node name is /dev/dri/card13 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 14 > drmOpenDevice: node name is /dev/dri/card14 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenByBusid: busid is PCI:1:0:0 > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 7, (OK) > drmOpenByBusid: drmOpenMinor returns 7 > drmOpenByBusid: drmGetBusid reports PCI:1:0:0 > (II) MGA(0): [drm] drmSetBusid failed (7, PCI:1:0:0), Device or resource busy > (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI. > (II) MGA(0): Using 4042 lines for offscreen memory. > (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > Solid filled trapezoids > 8x8 mono pattern filled rectangles > 8x8 mono pattern filled trapezoids > Indirect CPU to Screen color expansion > Screen to Screen color expansion > Solid Lines > Dashed Lines > Scanline Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 29 256x256 slots > 14 512x512 slots > (==) MGA(0): Backing store disabled > (==) MGA(0): Silken mouse enabled > (**) Option "dpms" > (**) MGA(0): DPMS enabled > (II) MGA(0): Using overlay video > (==) MGA(0): Direct rendering disabled > (WW) MGA(0): Option "noDDCvbe" is not used > (==) ATI(1): Write-combining range (0xeb000000,0x400000) > (II) ATI(1): Largest offscreen areas (with overlaps): > (II) ATI(1): 800 x 2020 rectangle at 0,600 > (II) ATI(1): 640 x 2021 rectangle at 0,600 > (II) ATI(1): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 14 256x256 slots > (==) ATI(1): Backing store disabled > (==) ATI(1): Silken mouse enabled > (II) Entity 0 shares no resources > (II) Entity 1 shares no resources > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "MouseManPlusPS/2" > (**) Generic Mouse: Protocol: "MouseManPlusPS/2" > (**) Option "CorePointer" > (**) Generic Mouse: Core Pointer > (**) Option "Device" "/dev/psaux" > (**) Option "Buttons" "5" > (**) Option "Emulate3Buttons" "false" > (**) Option "ZAxisMapping" "4 5" > (**) Generic Mouse: ZAxisMapping: buttons 4 and 5 > (**) Generic Mouse: Buttons: 5 > (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE) > SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0 > SetKbdSettings - Succeeded > AUDIT: Tue Nov 12 18:13:11 2002: 6354 X: client 5 rejected from local host > (II) Screen 0 shares mem & io resources > (II) Screen 1 shares mem & io resources > (II) Screen 0 shares mem & io resources > (II) Screen 1 shares mem & io resources > 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort+ >SERR- <PERR- > Latency: 32 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1 > > 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) >(prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > Memory behind bridge: e4000000-e7ffffff > Prefetchable memory behind bridge: e8000000-e9ffffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+ > > 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 0 > > 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 >[Master]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Region 4: I/O ports at f000 [size=16] > > 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 >[UHCI]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin D routed to IRQ 10 > Region 4: I/O ports at 9000 [size=32] > > 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin ? routed to IRQ 9 > > 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) > Subsystem: D-Link System Inc DE-528 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at 9400 [size=32] > > 00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c) > Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (2500ns min, 2500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at 9800 [size=128] > Region 1: Memory at ef021000 (32-bit, non-prefetchable) [size=128] > Expansion ROM at ea000000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) > Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ ><MAbort+ >SERR- <PERR- > Latency: 32 (3000ns min, 32000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at 9c00 [size=64] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0c.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 >GT] (rev 41) (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Region 0: Memory at eb000000 (32-bit, non-prefetchable) [disabled] [size=16M] > Region 1: I/O ports at a000 [disabled] [size=256] > Region 2: Memory at ef020000 (32-bit, non-prefetchable) [disabled] [size=4K] > Expansion ROM at ec000000 [disabled] [size=128K] > > 00:0d.0 VGA compatible controller: Texas Instruments TVP4010 [Permedia] (rev 01) >(prog-if 00 [VGA]) > Subsystem: 3DLabs: Unknown device 0096 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ef000000 (32-bit, non-prefetchable) [disabled] [size=128K] > Region 1: Memory at ee800000 (32-bit, non-prefetchable) [disabled] [size=8M] > Region 2: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=8M] > Expansion ROM at ed000000 [disabled] [size=64K] > > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) >(prog-if 00 [VGA]) > Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SDRAM > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- >SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (4000ns min, 8000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=16K] > Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=8M] > Expansion ROM at <unassigned> [disabled] [size=64K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [f0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1 > > > -- > greg _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
