Andre Maassdorf wrote:
I recently got a Mainboard (ECS K7SOM with Duron 1200 MHz) with on-boardLast time I looked mga 100, 200, 220 were only supported in agp not pci in XFree86 4.2.0.
graphics (SiS740) that has ruther low image quality. So i decided to use a Matrox Mystique (PCI, driver mga1064sg) that i
installed as primary graphics adaptor. The Problem now is that the Machine completely
hangs, maybe the
kernel panics, because even remote access to the machine hangs immediately,
but i don't have any graphics output at this point cause the screen already blanked
(means black screen).
I also tried to start without a display manager via startx and only TWM, but
result is absolutely
the same.
I guess its related to a conflict between mga-card and on-board sis graphics
(and unfortunately my current bios doesn't provide turning it off), but i
have no idea where
to catch it.
Does anyone know about this? Otherwise i need to investigate any further.
My config:
Linux 2.4.18 (now agpart + dri disabled but this doesn't change anything)
XFree86 4.2.0
BusID "PCI:0:x:0" for mga where is one of 13,11,9
BudID "PCI:1:0:0" for the SiS chip, so this is agp
Thx for your comments.
andre
PS: if needed i can send my pci data (which says its a 1064sg) and/or
XF86Config+logs later
Check your logs at /var/log/XFree86.0.log
Ryan Merrick
[EMAIL PROTECTED]
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
