Thanks, Bruce, but it does not seem to help on my system. No indication in the log that the option was even there. Are you running CVS drivers or 4.2.1?
FWIW, I am on an IBM ThinkPad T30 running FreeBSD Stable with XFree86 4.2.1 and ati and radeon drivers built from CVS in about September to fix the line drawing problem seen when minimizing or rapidly moving a window. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634 > From: "Shei, Shing-Shong" <[EMAIL PROTECTED]> > Sender: [EMAIL PROTECTED] > Date: Tue, 03 Dec 2002 14:02:33 -0500 > > Russ Fink posted the following note before: > > ------------------------------------------------------- > ... > Section "Device" > Identifier "ATI|Rage Mobility M3 AGP 2x" > BoardName "Unknown" > Driver "r128" > Option "Display" "BIOS" > EndSection > > The part that is the fix is the >>Option "Display" "BIOS"<< part. > This tells the X server to consult the BIOS and use whatever settings > it is using for the display. > ... > ------------------------------------------------------- > > I put the Option line in /etc/X11/XF86Config (Red Hat 8.0) and > the screen doesn't garble anymore when the lid is closed and > open again. Hope this helps. > > Bruce > > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
