What distro is this(for xrdp)? If it's EL, I think there is a pam file to manually copy over.
Jay On Fri, Apr 4, 2014 at 1:14 AM, Pawel Por <porpa...@gmail.com> wrote: > Hi > I cannot connect from Windows 7 RD to my xrdp. > I get the following error message: > connecting to sesman ip 127.0.0.1 port 3350 > sesman connect ok > sending login info to session manager > xrdp_mm_process_login_response: login failed > > xrdp version: xrdp-git 1861.0a2b3a2-1 > I use sesman-X11rdp option to log in and the login and password are correct. > > Please help me !!! > > Below is the listing of my log and config files. > > ################# /etc/xrdp/xrdp.ini > > [globals] > bitmap_cache=yes > bitmap_compression=yes > port=3389 > crypt_level=high > allow_channels=true > max_bpp=24 > fork=yes > # regulate if the listening socket use socket option tcp_nodelay > # no buffering will be performed in the TCP stack > tcp_nodelay=yes > # regulate if the listening socket use socket option keepalive > # if the network connection disappear without close messages the connection > will be closed > tcp_keepalive=yes > #black=000000 > #grey=d6d3ce > #dark_grey=808080 > #blue=08246b > #dark_blue=08246b > #white=ffffff > #red=ff0000 > #green=00ff00 > #background=626c72 > #autorun=xrdp1 > #hidelogwindow=yes > > # when true, userid/password *must* be passed on cmd line > # require_credentials=yes > > #bulk_compression=yes > # You can set the PAM error text in a gateway setup (MAX 256 chars) > #pamerrortxt=change your password according to policy at http://url > #new_cursors=no > > [Logging] > LogFile=xrdp.log > LogLevel=DEBUG > EnableSyslog=1 > SyslogLevel=DEBUG > # LogLevel and SysLogLevel could by any of: core, error, warning, info or > debug > > [channels] > # Channel names not listed here will be blocked by XRDP. > # You can block any channel by setting its value to false. > # IMPORTANT! All channels are not supported in all use > # cases even if you set all values to true. > # You can override these settings on each session type > # These settings are only used if allow_channels=true > rdpdr=true > rdpsnd=true > drdynvc=true > cliprdr=true > rail=true > xrdpvr=true > > # for debugging xrdp, in section xrdp1, change port=-1 to this: > # port=/tmp/.xrdp/xrdp_display_10 > > # for debugging xrdp, add following line to section xrdp1 > # chansrvport=/tmp/.xrdp/xrdp_chansrv_socket_7210 > > [xrdp1] > name=sesman-X11rdp > lib=libxup.so > username=ask > password=ask > ip=127.0.0.1 > port=-1 > xserverbpp=24 > code=10 > > [xrdp2] > name=sesman-Xvnc > lib=libvnc.so > username=ask > password=ask > ip=127.0.0.1 > port=-1 > > [xrdp3] > name=console > lib=libvnc.so > ip=127.0.0.1 > port=5900 > username=na > password=ask > > [xrdp4] > name=vnc-any > lib=libvnc.so > ip=ask > port=ask5900 > username=na > password=ask > #pamusername=asksame > #pampassword=asksame > #pamsessionmng=127.0.0.1 > > [xrdp5] > name=sesman-any > lib=libvnc.so > ip=ask > port=-1 > username=ask > password=ask > > [xrdp6] > name=rdp-any > lib=librdp.so > ip=ask > port=ask3389 > > [xrdp7] > name=freerdp-any > lib=libxrdpfreerdp1.so > ip=ask > port=ask3389 > username=ask > password=ask > # You can override the common channel settings for each session type > #channel.rdpdr=true > #channel.rdpsnd=true > #channel.drdynvc=true > #channel.cliprdr=true > #channel.rail=true > #channel.xrdpvr=true > > ######################## xrdp.log > > [20140404-09:29:03] [INFO ] A connection received from: 172.18.129.6 port > 55444 > [20140404-09:29:03] [INFO ] An established connection closed to endpoint: > 172.18.129.6:55444 - socket: 8 > [20140404-09:29:03] [INFO ] An established connection closed to endpoint: > NULL:NULL - socket: 7 > [20140404-09:29:03] [INFO ] An established connection closed to endpoint: > 172.18.129.6:55444 - socket: 8 > [20140404-09:29:03] [INFO ] A connection received from: 172.18.129.6 port > 55445 > [20140404-09:29:04] [INFO ] An established connection closed to endpoint: > 172.18.129.6:55445 - socket: 8 > [20140404-09:29:04] [INFO ] An established connection closed to endpoint: > NULL:NULL - socket: 7 > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > [20140404-09:29:04] [DEBUG] xrdp_00000557_wm_login_mode_event_00000001 > > ######################## xrdp-sesman.log > > [20140404-09:55:00] [WARN ] [init:46] libscp initialized > [20140404-09:55:00] [CORE ] starting sesman with pid 1989 > [20140404-09:55:00] [INFO ] listening... > [20140404-09:55:30] [INFO ] A connection received from: 127.0.0.1 port 45862 > [20140404-09:55:30] [INFO ] scp thread on sck 8 started successfully > [20140404-09:55:30] [INFO ] An established connection closed to endpoint: > 127.0.0.1:45862 - socket: 8 > > > ------------------------------------------------------------------------------ > > _______________________________________________ > xrdp-devel mailing list > xrdp-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xrdp-devel > ------------------------------------------------------------------------------ _______________________________________________ xrdp-devel mailing list xrdp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xrdp-devel
