Thanks for reply. I'm using Arch Linux. Please write me which file should I copy where. I will check this on my box.
On Fri, Apr 4, 2014 at 11:53 AM, Jay Sorg <jay.s...@gmail.com> wrote: > What distro is this(for xrdp)? > If it's EL, I think there is a pam file to manually copy over. > > Jay > > > On Fri, Apr 4, 2014 at 1:14 AM, Pawel Por <porpa...@gmail.com> wrote: > > Hi > > I cannot connect from Windows 7 RD to my xrdp. > > I get the following error message: > > connecting to sesman ip 127.0.0.1 port 3350 > > sesman connect ok > > sending login info to session manager > > xrdp_mm_process_login_response: login failed > > > > xrdp version: xrdp-git 1861.0a2b3a2-1 > > I use sesman-X11rdp option to log in and the login and password are > correct. > > > > Please help me !!! > > > > Below is the listing of my log and config files. > > > > ################# /etc/xrdp/xrdp.ini > > > > [globals] > > bitmap_cache=yes > > bitmap_compression=yes > > port=3389 > > crypt_level=high > > allow_channels=true > > max_bpp=24 > > fork=yes > > # regulate if the listening socket use socket option tcp_nodelay > > # no buffering will be performed in the TCP stack > > tcp_nodelay=yes > > # regulate if the listening socket use socket option keepalive > > # if the network connection disappear without close messages the > connection > > will be closed > > tcp_keepalive=yes > > #black=000000 > > #grey=d6d3ce > > #dark_grey=808080 > > #blue=08246b > > #dark_blue=08246b > > #white=ffffff > > #red=ff0000 > > #green=00ff00 > > #background=626c72 > > #autorun=xrdp1 > > #hidelogwindow=yes > > > > # when true, userid/password *must* be passed on cmd line > > # require_credentials=yes > > > > #bulk_compression=yes > > # You can set the PAM error text in a gateway setup (MAX 256 chars) > > #pamerrortxt=change your password according to policy at http://url > > #new_cursors=no > > > > [Logging] > > LogFile=xrdp.log > > LogLevel=DEBUG > > EnableSyslog=1 > > SyslogLevel=DEBUG > > # LogLevel and SysLogLevel could by any of: core, error, warning, info or > > debug > > > > [channels] > > # Channel names not listed here will be blocked by XRDP. > > # You can block any channel by setting its value to false. > > # IMPORTANT! All channels are not supported in all use > > # cases even if you set all values to true. > > # You can override these settings on each session type > > # These settings are only used if allow_channels=true > > rdpdr=true > > rdpsnd=true > > drdynvc=true > > cliprdr=true > > rail=true > > xrdpvr=true > > > > # for debugging xrdp, in section xrdp1, change port=-1 to this: > > # port=/tmp/.xrdp/xrdp_display_10 > > > > # for debugging xrdp, add following line to section xrdp1 > > # chansrvport=/tmp/.xrdp/xrdp_chansrv_socket_7210 > > > > [xrdp1] > > name=sesman-X11rdp > > lib=libxup.so > > username=ask > > password=ask > > ip=127.0.0.1 > > port=-1 > > xserverbpp=24 > > code=10 > > > > [xrdp2] > > name=sesman-Xvnc > > lib=libvnc.so > > username=ask > > password=ask > > ip=127.0.0.1 > > port=-1 > > > > [xrdp3] > > name=console > > lib=libvnc.so > > ip=127.0.0.1 > > port=5900 > > username=na > > password=ask > > > > [xrdp4] > > name=vnc-any > > lib=libvnc.so > > ip=ask > > port=ask5900 > > username=na > > password=ask > > #pamusername=asksame > > #pampassword=asksame > > #pamsessionmng=127.0.0.1 > > > > [xrdp5] > > name=sesman-any > > lib=libvnc.so > > ip=ask > > port=-1 > > username=ask > > password=ask > > > > [xrdp6] > > name=rdp-any > > lib=librdp.so > > ip=ask > > port=ask3389 > > > > [xrdp7] > > name=freerdp-any > > lib=libxrdpfreerdp1.so > > ip=ask > > port=ask3389 > > username=ask > > password=ask > > # You can override the common channel settings for each session type > > #channel.rdpdr=true > > #channel.rdpsnd=true > > #channel.drdynvc=true > > #channel.cliprdr=true > > #channel.rail=true > > #channel.xrdpvr=true > > > > ######################## xrdp.log > > > > [20140404-09:29:03] [INFO ] A connection received from: 172.18.129.6 port > > 55444 > > [20140404-09:29:03] [INFO ] An established connection closed to endpoint: > > 172.18.129.6:55444 - socket: 8 > > [20140404-09:29:03] [INFO ] An established connection closed to > endpoint: > > NULL:NULL - socket: 7 > > [20140404-09:29:03] [INFO ] An established connection closed to > endpoint: > > 172.18.129.6:55444 - socket: 8 > > [20140404-09:29:03] [INFO ] A connection received from: 172.18.129.6 > port > > 55445 > > [20140404-09:29:04] [INFO ] An established connection closed to > endpoint: > > 172.18.129.6:55445 - socket: 8 > > [20140404-09:29:04] [INFO ] An established connection closed to > endpoint: > > NULL:NULL - socket: 7 > > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > > [20140404-09:29:04] [DEBUG] MCS_CJRQ - channel join request received > > [20140404-09:29:04] [DEBUG] xrdp_00000557_wm_login_mode_event_00000001 > > > > ######################## xrdp-sesman.log > > > > [20140404-09:55:00] [WARN ] [init:46] libscp initialized > > [20140404-09:55:00] [CORE ] starting sesman with pid 1989 > > [20140404-09:55:00] [INFO ] listening... > > [20140404-09:55:30] [INFO ] A connection received from: 127.0.0.1 port > 45862 > > [20140404-09:55:30] [INFO ] scp thread on sck 8 started successfully > > [20140404-09:55:30] [INFO ] An established connection closed to endpoint: > > 127.0.0.1:45862 - socket: 8 > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > xrdp-devel mailing list > > xrdp-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xrdp-devel > > >
------------------------------------------------------------------------------
_______________________________________________ xrdp-devel mailing list xrdp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xrdp-devel
