Niki,
I've heard an option for this as basting on some fabric to the sides to give
you the extra allowance for stretching. The first piece I finished ended up
with a 1/4 of an inch on all sides (I've learned alot since then) but Hobby
Lobby still did a great job framing it. I'm not sure how they did it as I
didn't know enough to ask.
Good Luck,
Margaret
----- Original Message -----
From: Nikki Berdine <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, March 26, 1999 11:07 AM
Subject: XS: fabric size & framing
> Hi everyone!
>
> One quick question. I started a kit two years ago, and have faithfully
been
> working with it off and on. I got to one of the edges (finally) and there
> is only about an inch of fabric left. I'm afraid the other edges will be
> the same, or worse!
>
> Is this enough fabric left over to have it framed? I have always been
told
> to leave at least 3-4 inches on each side.
>
> Nikki in OH
>
>
> _______________________________________________________________
> Sponsored by Beakers Graphic Designs
http://www.probe.net/~beakers/ecsp.htm
> The Xstitch Home page at http://www.probe.net/~beakers/xshome.htm
> Mary Joseph - XStitch List Moderator - [EMAIL PROTECTED]
> Monica Sudds - XStitch List Administrator - [EMAIL PROTECTED]
> ===============================================================
> To unsubscribe TO: [EMAIL PROTECTED]
> Message: unsubscribe XStitch
>
_______________________________________________________________
Sponsored by Beakers Graphic Designs http://www.probe.net/~beakers/ecsp.htm
The Xstitch Home page at http://www.probe.net/~beakers/xshome.htm
Mary Joseph - XStitch List Moderator - [EMAIL PROTECTED]
Monica Sudds - XStitch List Administrator - [EMAIL PROTECTED]
===============================================================
To unsubscribe TO: [EMAIL PROTECTED]
Message: unsubscribe XStitch
