your version of Xorg7.2.0 that is currently shipping bundled with / as
part of SXCR ?
Only on the U5/U10 alone (as it unfortunately appears to be the case),
or also on a few more/different systems??
(it would never perform _any_ successful pci scanning on _most_ boxes
[i.e. on Schizo based ones like the Blade1000/2000], would poorly fail
with a SIGBUS (or SIGSEGV in fewer scenarios), even if you provided it
with a preconfigured "good / working" xorg.conf for the appropriate
frame buffer device[path|driver], therefore also without "-configure" /
even with no arguments at all)
... just for my interest ??
p.s. Congrats to your election :-)
pp.s. Above SIGBUS's can indeed be prevented with either
"-xmemalign=1i" or "-xmemalign=4i", however: Unfortunately are then no
devices found / added to the tree in case of whatever combinations of
"-xmemalign=??"
(I found a different solution for now, which you will see in three days)
Martin Bochnig wrote:
> I think the only Sbus cards ever officially supported in those were the
> cg6 series (TurboGX/TurboGXPlus).
>
>
> So shall I include that (existing) driver
> yes[ ]
> no [ ] ?
ppp.s. Why didn't you respond?
Best regards,
Martin Bochnig
Final "p.s.", you version of Xorg meeting a Blade 2000 (executed with
no arguments) :
# cat Xorg72_DEFAULTSHIPPINGsnv59_64_SCHIZO.log
Running: Xorg
dbx: warning: setuid program exec()ed. Reattaching
(process id 676)
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: SunOS 5.11 sun4u
Current Operating System: SunOS mb1x-ws0 5.11 snv_59 sun4u
Build Date: 09 February 2007
Solaris ABI: 64-bit
SUNWxorg-server package version: 6.9.0.5.11.5900,REV=0.2007.02.09
SUNWxorg-graphics-ddx package version: 6.9.0.5.11.5900,REV=0.2007.02.09
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 14 04:25:18 2007
(==) Using config file: "/etc/X11/xorg.conf"
dbx: no symbol table loaded yet -- use "prog -readsyms" to load them
signal BUS (invalid address alignment) at 0x1000c8d5c at 0x1000c8d5c
0x00000001000c8d5c: ldx [%o0 + 16], %o5
Entering debugger ...
...
# uname -a
SunOS mb1x-ws0 5.11 snv_59 sun4u sparc SUNW,Sun-Blade-1000
