Question #165458 on Yade changed:
https://answers.launchpad.net/yade/+question/165458
Status: Open => Answered
Chareyre proposed the following answer:
1/ I'm not used to facets creation, you'll need help from somebody else.
2/ Spheres are moving in your script, why do you say they don't? I see
them going down until they touch the facets (and guess what happens when
a vertical column of spheres is under gravity: they are at equilibrium.
Try e.g. gravity (1,-9.81,0) and you will see).
3/ You need to enable timing before calculation cycles if you want to
measure something. Or, at the end of your script, run a few additional
steps and type timing.stats() again.
Also, you have a typo: O.timingEnabled=True, instead of
O.timingEnabled==True.
4/ Looking at your damping value (0.7), I bet you are a PFC user? If you
are doing speed comparisons, would you mind posting some results here?
I'm all interested.
Bruno
Name
Count Time Rel. time
-------------------------------------------------------------------------------------------------------
ForceResetter 100
318us 0.32%
InsertionSortCollider 3
9891us 10.05%
InteractionLoop 100
73487us 74.67%
GravityEngine 100
1891us 1.92%
NewtonIntegrator 100
12821us 13.03%
TOTAL
98409us 100.00%
On 20/07/11 15:36, Christian Jakob wrote:
> New question #165458 on Yade:
> https://answers.launchpad.net/yade/+question/165458
>
> Hi,
>
> I created a model with 1000 spheres and one facet. There I cannot fix two
> problems:
>
> 1.) The facet is in xy-plane, but I want to have it normal to (.02,.02,1),
> not (0,0,1)!
> How can I do this?
> I tried different things with facet, facetBox, wall and facetPolygon, but I
> could not fix it.
>
> 2.) Spheres are not moving and I dont know why. timing.stats() gives:
>
> Name Count
> Time Rel. time
> -------------------------------------------------------------------------------------------------------
> ForceResetter 0 0us
>
> InsertionSortCollider 0 0us
>
> InteractionLoop 0 0us
>
> GravityEngine 0 0us
>
> NewtonIntegrator 0 0us
>
> TOTAL 0us
>
>
>
>
> Now the script:
>
> # script START
> ------------------------------------------------------------------------------------
>
> #!/usr/bin/python
> # -*- coding: utf-8 -*-
>
> # speed test file for YADE
>
>
> num_balls1D = 10
>
> num_balls = num_balls1D*num_balls1D*num_balls1D
>
> logfilename = 'speed-test-output%i-balls.log' % (int(num_balls))
>
> origin_wall = num_balls1D/2
>
> x_pos = 0
>
> y_pos = 0
>
> z_pos = 0
> friction=0.5
> angle=atan(friction)
>
> id_FacetMat=O.materials.append(ViscElMat(kn=1e8,ks=1e8,cn=0.0,cs=0.0,frictionAngle=angle))
> id_SphereMat=O.materials.append(ViscElMat(kn=1e6,ks=1e6,cn=0.0,cs=0.0,density=1000,frictionAngle=angle))
>
> FacetMat=O.materials[id_FacetMat]
> SphereMat=O.materials[id_SphereMat]
>
> O.engines=[
> ForceResetter(),
> InsertionSortCollider([Bo1_Sphere_Aabb(),Bo1_Facet_Aabb()]),
> InteractionLoop(
> [Ig2_Sphere_Sphere_ScGeom(),Ig2_Facet_Sphere_ScGeom()],
> [Ip2_ViscElMat_ViscElMat_ViscElPhys()],
> [Law2_ScGeom_ViscElPhys_Basic()],
> ),
> GravityEngine(gravity=(0,0,-9.81)),
> NewtonIntegrator(damping=0.7),
> ]
>
> id_facet=O.bodies.append(geom.facetBox((origin_wall,origin_wall,0),(100,100,0),material=FacetMat))
>
> for ii in range(1,num_balls1D):
>
> x_pos = x_pos + 1
>
> y_pos = 0
>
> z_pos = 0
>
> for jj in range(1,num_balls1D):
>
> y_pos = y_pos + 1
>
> z_pos = 0
>
> for kk in range(1,num_balls1D):
>
> z_pos = z_pos + 1
> O.bodies.append(utils.sphere([x_pos,y_pos,z_pos],
> material=SphereMat, radius=0.5, wire=False, highlight=False))#,
> color=(50,50,0)
>
>
> from yade import timing
>
> O.dt=1e-3
>
> start_time=O.realtime
> print start_time
>
> O.run(100,True)
>
> stop_time=O.realtime
> time_needed=stop_time-start_time
> print time_needed
>
> O.timingEnabled==True
> timing.stats()
>
> # script END
> ------------------------------------------------------------------------------------
>
> Christian.
>
--
_______________
Bruno Chareyre
Associate Professor
ENSE³ - Grenoble INP
Lab. 3SR
BP 53 - 38041, Grenoble cedex 9 - France
Tél : +33 4 56 52 86 21
Fax : +33 4 76 82 70 43
________________
You received this question notification because you are a member of
yade-users, which is an answer contact for Yade.
_______________________________________________
Mailing list: https://launchpad.net/~yade-users
Post to : [email protected]
Unsubscribe : https://launchpad.net/~yade-users
More help : https://help.launchpad.net/ListHelp
