Hi all. I have an old TiBook (667MHz/30GB/512MB) with an airport card that I have just gone through the process of partitioning and reinstalling OSes so that it has MacOSX, MacOS9, and YDL (4.0.1 downloaded) on it - about 10GB each.
I have an origianl base station (11MBPS) which works under OS X, and OS 9 [on this machine and others]. I have the network name and the numeric equivalent password key. The installation of YDL detects the card as an ethernet device. I have tried entering the airport information during installation [it becomes device eth0 = ethernet device] and afterwards - as an overlay (eth0:1 = wireless device) or replacing the original device [eth0 = wireless device] but the best I can get when I restart the network is <not exact text> Error with Set Mode (8B06), and Error with Set Frequency (8B04) resulting in failure to get teh network device activated. I tried doing the modprobe procedure described in a how-to but that didn't make any difference. I have no trouble using the built-in ethernet hardware for networking, but I'd like to do it without wires. Anyone with some ideas? cheers Jonathan Pratt _______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
