> Hi all. > > I have an old TiBook (667MHz/30GB/512MB) with an airport card that I > have just gone through the process of partitioning and reinstalling OSes > so that it has MacOSX, MacOS9, and YDL (4.0.1 downloaded) on it - about > 10GB each. > > I have an origianl base station (11MBPS) which works under OS X, and OS > 9 [on this machine and others]. I have the network name and the numeric > equivalent password key. The installation of YDL detects the card as an > ethernet device. I have tried entering the airport information during > installation [it becomes device eth0 = ethernet device] and afterwards - > as an overlay (eth0:1 = wireless device) or replacing the original > device [eth0 = wireless device] but the best I can get when I restart > the network is > > <not exact text> > Error with Set Mode (8B06), and > Error with Set Frequency (8B04) > > resulting in failure to get teh network device activated. > > I tried doing the modprobe procedure described in a how-to but that > didn't make any difference. > > I have no trouble using the built-in ethernet hardware for networking, > but I'd like to do it without wires. > > Anyone with some ideas? > Have you installed wireless-tools? if so, see what iwconfig says. It will dectect which cards are wireless.
_______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
