Hello Laurent I am building for qemuriscv64
Command :- MACHINE=qemuriscv64 bitbake core-image-full-cmdline Thank you. Regards Vaibhav Vivek Deshpande On Thu, Oct 20, 2022 at 11:00 PM Laurent Gauthier < [email protected]> wrote: > Hi Vaibhav, > > Out of curiosity which image did you build? > > Kind regards, Laurent. > > On Thu, Oct 20, 2022 at 7:07 PM Vaibhav Deshpande > <[email protected]> wrote: > > > > Helo > > > > I have added systemd in rootfs by adding IMAGE_INSTALL = " systemd" in > local.conf and the issue solved > > is this required for the latest yocto version (kirkstone)? > > > > > > Thank you. > > > > Regards > > Vaibhav Vivek Deshpande > > > > > > On Mon, Oct 17, 2022 at 1:28 AM Zoran Stojsavljevic < > [email protected]> wrote: > >> > >> Interesting... Looking into the log massage itself! > >> > >> > [ 0.000000] Kernel command line: root=/dev/vda2 rootwait > console=ttyS0 earlycon=uart8250,mmio,0x10000000 > >> > >> Command line does not specify baud rate... Usually by default it is > >> 115200. Just a kludge. > >> > >> Then: > >> > >> > [ 0.000000] earlycon: uart8250 at MMIO 0x0000000010000000 (options > '') > >> > [ 0.000000] printk: bootconsole [uart8250] enabled > >> > >> bootconsole enabled, seems correct. > >> > >> Then: > >> > >> > [ 1.628806] Serial: 8250/16550 driver, 4 ports, IRQ sharing > disabled > >> > [ 1.648238] printk: console [ttyS0] disabled > >> > [ 1.652252] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 166, > base_baud = 230400) is a 16550A > >> > [ 1.656816] printk: console [ttyS0] enabled > >> > [ 1.656816] printk: console [ttyS0] enabled > >> > [ 1.657728] printk: bootconsole [uart8250] disabled > >> > [ 1.657728] printk: bootconsole [uart8250] disabled > >> > >> From what we see that the base baud rate is 230400 (?), everything > >> else is, seems, correct. > >> > >> So, three things, which came adhoc to my mind: > >> [1] Please, check the baud rate; > >> [2] Please, check to which group /dev/ttyS0 belongs (root dialout)? > >> [3] The terminal should be interactive, but no way to check this (from > >> the logs)??? > >> > >> My two cent worth answer, > >> Zee > >> _______ > >> > >> On Sun, Oct 16, 2022 at 8:32 PM Vaibhav Deshpande > >> <[email protected]> wrote: > >> > > >> > Hello > >> > > >> > I am trying to build a yocto image from the kirkstone branch ( > https://github.com/openembedded/openembedded-core/tree/kirkstone) build > gets successful but at the time of linux booting I am getting below error. > >> > >> ...[snap]... > > > > > > > > > > > -- > Laurent Gauthier > Embedded Linux Systems & Software > Phone: +33 630 483 429 > https://soccasys.com >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#58389): https://lists.yoctoproject.org/g/yocto/message/58389 Mute This Topic: https://lists.yoctoproject.org/mt/94368916/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
