> For enabling systemd its best to start with
> DISTRO = "poky-altcfg"

With all due respect, Khem, I thought that this line in local.conf
makes systemd as default?!
INIT_MANAGER ?= "systemd"

>> Hello Zoran
>> Yes, i have set INIT_MANAGER ?= "systemd"

Zee
_______

On Fri, Oct 21, 2022 at 6:28 PM Khem Raj <raj.k...@gmail.com> wrote:
>
> If you are using poky then ssytemd is not default init system, its
> sysvinit. For enabling systemd its best to start with
>
> DISTRO = "poky-altcfg"
>
> On Sun, Oct 16, 2022 at 11:32 AM Vaibhav Deshpande
> <vdeshpa...@ventanamicro.com> wrote:
> >
> > Hello
> >
> > I am trying to build a yocto image from the kirkstone branch 
> > (https://github.com/openembedded/openembedded-core/tree/kirkstone) build 
> > gets successful but at the time of linux booting I am getting below error.
> >
> > [    0.000000] Linux version 5.19.0-rc4 (oe-user@oe-host) 
> > (riscv64-oe-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 
> > SMP Wed Aug 24 14:46:22 UTC 2022
> > [    0.000000] random: crng init done
> > [    0.000000] Machine model: Ventana VT1 QEMU
> > [    0.000000] SBI specification v1.0 detected
> > [    0.000000] SBI implementation ID=0x1 Version=0x10001
> > [    0.000000] SBI TIME extension detected
> > [    0.000000] SBI IPI extension detected
> > [    0.000000] SBI RFENCE extension detected
> > [    0.000000] SBI SRST extension detected
> > [    0.000000] earlycon: uart8250 at MMIO 0x0000000010000000 (options '')
> > [    0.000000] printk: bootconsole [uart8250] enabled
> > [    0.000000] efi: EFI v2.90 by Das U-Boot
> > [    0.000000] efi: RTPROP=0xfe73c020 SMBIOS=0xfe738000 
> > MEMRESERVE=0xfd3ca020
> > [    0.000000] Zone ranges:
> > [    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
> > [    0.000000]   Normal   empty
> > [    0.000000] Movable zone start for each node
> > [    0.000000] Early memory node ranges
> > [    0.000000]   node   0: [mem 0x0000000080000000-0x00000000fe737fff]
> > [    0.000000]   node   0: [mem 0x00000000fe738000-0x00000000fe738fff]
> > [    0.000000]   node   0: [mem 0x00000000fe739000-0x00000000fe73bfff]
> > [    0.000000]   node   0: [mem 0x00000000fe73c000-0x00000000fe742fff]
> > [    0.000000]   node   0: [mem 0x00000000fe743000-0x00000000fff77fff]
> > [    0.000000]   node   0: [mem 0x00000000fff78000-0x00000000fff78fff]
> > [    0.000000]   node   0: [mem 0x00000000fff79000-0x00000000ffffffff]
> > [    0.000000] Initmem setup node 0 [mem 
> > 0x0000000080000000-0x00000000ffffffff]
> > [    0.000000] SBI HSM extension detected
> > [    0.000000] riscv: base ISA extensions acdfhim
> > [    0.000000] riscv: ELF capabilities acdfim
> > [    0.000000] riscv: Svinval extension supported
> > [    0.000000] percpu: Embedded 18 pages/cpu s34488 r8192 d31048 u73728
> > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
> > [    0.000000] Kernel command line: root=/dev/vda2 rootwait console=ttyS0 
> > earlycon=uart8250,mmio,0x10000000
> > [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 
> > bytes, linear)
> > [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 
> > bytes, linear)
> > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > [    0.000000] Virtual kernel memory layout:
> > [    0.000000]       fixmap : 0xff1bfffffee00000 - 0xff1bffffff000000   
> > (2048 kB)
> > [    0.000000]       pci io : 0xff1bffffff000000 - 0xff1c000000000000   (  
> > 16 MB)
> > [    0.000000]      vmemmap : 0xff1c000000000000 - 0xff20000000000000   
> > (1024 TB)
> > [    0.000000]      vmalloc : 0xff20000000000000 - 0xff60000000000000   
> > (16384 TB)
> > [    0.000000]       lowmem : 0xff60000000000000 - 0xff60000080000000   
> > (2048 MB)
> > [    0.000000]       kernel : 0xffffffff80000000 - 0xffffffffffffffff   
> > (2047 MB)
> > [    0.000000] Memory: 2034884K/2097152K available (7677K kernel code, 
> > 4908K rwdata, 4096K rodata, 2204K init, 463K bss, 62268K reserved, 0K 
> > cma-reserved)
> > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
> > [    0.000000] rcu: Hierarchical RCU implementation.
> > [    0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
> > [    0.000000] rcu: RCU debug extended QS entry/exit.
> > [    0.000000] Tracing variant of Tasks RCU enabled.
> > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 
> > 25 jiffies.
> > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
> > [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> > [    0.000000] riscv-intc: 64 local interrupts mapped using AIA
> > [    0.000000] riscv-imsic: imsics@28000000:  hart-index-bits: 4,  
> > guest-index-bits: 3
> > [    0.000000] riscv-imsic: imsics@28000000: group-index-bits: 0, 
> > group-index-shift: 24
> > [    0.000000] riscv-imsic: imsics@28000000: mapped 255 interrupts for 16 
> > CPUs at 0x0000000028000000
> > [    0.000000] riscv-imsic: imsics@28000000: enable/disable sync using 
> > interrupt 2
> > [    0.000000] riscv-imsic: imsics@28000000: providing IPIs using interrupt 
> > 1
> > [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on 
> > contention.
> > [    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] 
> > hartid [15]
> > [    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff 
> > max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
> > [    0.000175] sched_clock: 64 bits at 10MHz, resolution 100ns, wraps every 
> > 4398046511100ns
> > [    0.003481] Timer interrupt in S-mode is available via sstc extension
> > [    0.025738] Console: colour dummy device 80x25
> > [    0.029321] Calibrating delay loop (skipped), value calculated using 
> > timer frequency.. 20.00 BogoMIPS (lpj=40000)
> > [    0.031650] pid_max: default: 32768 minimum: 301
> > [    0.034091] LSM: Security Framework initializing
> > [    0.040644] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, 
> > linear)
> > [    0.041871] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 
> > bytes, linear)
> > [    0.113999] cblist_init_generic: Setting adjustable number of callback 
> > queues.
> > [    0.115760] cblist_init_generic: Setting shift to 4 and lim to 1.
> > [    0.118488] riscv: ELF compat mode supported
> > [    0.118927] ASID allocator using 16 bits (65536 entries)
> > [    0.122786] rcu: Hierarchical SRCU implementation.
> > [    0.128655] Remapping and enabling EFI services.
> > [    0.138132] smp: Bringing up secondary CPUs ...
> > [    0.289674] smp: Brought up 1 node, 16 CPUs
> > [    0.370978] devtmpfs: initialized
> > [    0.384472] clocksource: jiffies: mask: 0xffffffff max_cycles: 
> > 0xffffffff, max_idle_ns: 7645041785100000 ns
> > [    0.385374] futex hash table entries: 4096 (order: 6, 262144 bytes, 
> > linear)
> > [    0.395700] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> > [    0.402142] audit: initializing netlink subsys (disabled)
> > [    0.405233] audit: type=2000 audit(0.332:1): state=initialized 
> > audit_enabled=0 res=1
> > [    0.409992] cpuidle: using governor menu
> > [    0.991252] riscv-aplic d000000.aplic: 96 interrupts forwared to MSI 
> > base 0x0000000028000000
> > [    1.023056] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> > [    1.032106] ACPI: Interpreter disabled.
> > [    1.032688] iommu: Default domain type: Translated
> > [    1.033087] iommu: DMA domain TLB invalidation policy: strict mode
> > [    1.035341] SCSI subsystem initialized
> > [    1.040840] usbcore: registered new interface driver usbfs
> > [    1.041953] usbcore: registered new interface driver hub
> > [    1.042680] usbcore: registered new device driver usb
> > [    1.044787] Registered efivars operations
> > [    1.066789] vgaarb: loaded
> > [    1.070677] clocksource: Switched to clocksource riscv_clocksource
> > [    1.074619] pnp: PnP ACPI: disabled
> > [    1.116227] NET: Registered PF_INET protocol family
> > [    1.126621] IP idents hash table entries: 32768 (order: 6, 262144 bytes, 
> > linear)
> > [    1.137534] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 
> > 32768 bytes, linear)
> > [    1.138660] Table-perturb hash table entries: 65536 (order: 6, 262144 
> > bytes, linear)
> > [    1.139011] TCP established hash table entries: 16384 (order: 5, 131072 
> > bytes, linear)
> > [    1.139754] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, 
> > linear)
> > [    1.141266] TCP: Hash tables configured (established 16384 bind 16384)
> > [    1.144634] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
> > [    1.145365] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, 
> > linear)
> > [    1.148897] NET: Registered PF_UNIX/PF_LOCAL protocol family
> > [    1.159051] RPC: Registered named UNIX socket transport module.
> > [    1.159353] RPC: Registered udp transport module.
> > [    1.159522] RPC: Registered tcp transport module.
> > [    1.159699] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [    1.176066] workingset: timestamp_bits=46 max_order=19 bucket_order=0
> > [    1.213547] NFS: Registering the id_resolver key type
> > [    1.216026] Key type id_resolver registered
> > [    1.216360] Key type id_legacy registered
> > [    1.217343] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> > [    1.217841] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver 
> > Registering...
> > [    1.220266] 9p: Installing v9fs 9p2000 file system support
> > [    1.224198] NET: Registered PF_ALG protocol family
> > [    1.225340] Block layer SCSI generic (bsg) driver version 0.4 loaded 
> > (major 250)
> > [    1.227416] io scheduler mq-deadline registered
> > [    1.227748] io scheduler kyber registered
> > [    1.249381] pci-host-generic 30000000.pci: host bridge /soc/pci@30000000 
> > ranges:
> > [    1.251169] pci-host-generic 30000000.pci:       IO 
> > 0x0003000000..0x000300ffff -> 0x0000000000
> > [    1.252302] pci-host-generic 30000000.pci:      MEM 
> > 0x0040000000..0x007fffffff -> 0x0040000000
> > [    1.252770] pci-host-generic 30000000.pci:      MEM 
> > 0x0400000000..0x07ffffffff -> 0x0400000000
> > [    1.254245] pci-host-generic 30000000.pci: Memory resource size exceeds 
> > max for 32 bits
> > [    1.260809] pci-host-generic 30000000.pci: ECAM at [mem 
> > 0x30000000-0x3fffffff] for [bus 00-ff]
> > [    1.264633] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
> > [    1.265205] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [    1.265504] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> > [    1.265799] pci_bus 0000:00: root bus resource [mem 
> > 0x40000000-0x7fffffff]
> > [    1.266707] pci_bus 0000:00: root bus resource [mem 
> > 0x400000000-0x7ffffffff]
> > [    1.268627] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
> > [    1.628806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > [    1.648238] printk: console [ttyS0] disabled
> > [    1.652252] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 166, 
> > base_baud = 230400) is a 16550A
> > [    1.656816] printk: console [ttyS0] enabled
> > [    1.656816] printk: console [ttyS0] enabled
> > [    1.657728] printk: bootconsole [uart8250] disabled
> > [    1.657728] printk: bootconsole [uart8250] disabled
> > [    1.810913] loop: module loaded
> > [    1.813333] virtio_blk virtio1: 1/0/0 default/read/poll queues
> > [    1.825357] virtio_blk virtio1: [vda] 1071932 512-byte logical blocks 
> > (549 MB/523 MiB)
> > [    1.909650]  vda: vda1 vda2 vda3
> > [    1.942916] tun: Universal TUN/TAP device driver, 1.6
> > [    1.964238] e1000: Intel(R) PRO/1000 Network Driver
> > [    1.964596] e1000: Copyright (c) 1999-2006 Intel Corporation.
> > [    1.965214] e1000e: Intel(R) PRO/1000 Network Driver
> > [    1.965496] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> > [    1.967174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [    1.967691] ehci-pci: EHCI PCI platform driver
> > [    1.968378] ehci-platform: EHCI generic platform driver
> > [    1.969031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [    1.969540] ohci-pci: OHCI PCI platform driver
> > [    1.970742] ohci-platform: OHCI generic platform driver
> > [    1.974710] usbcore: registered new interface driver uas
> > [    1.975701] usbcore: registered new interface driver usb-storage
> > [    1.979125] mousedev: PS/2 mouse device common for all mice
> > [    1.985774] goldfish_rtc 101000.rtc: registered as rtc0
> > [    1.987831] goldfish_rtc 101000.rtc: setting system clock to 
> > 2022-08-25T10:45:53 UTC (1661424353)
> > [    1.993669] syscon-poweroff soc:poweroff: pm_power_off already claimed 
> > for sbi_srst_power_off
> > [    1.995212] syscon-poweroff: probe of soc:poweroff failed with error -16
> > [    1.998593] sdhci: Secure Digital Host Controller Interface driver
> > [    1.998909] sdhci: Copyright(c) Pierre Ossman
> > [    1.999509] sdhci-pltfm: SDHCI platform and OF driver helper
> > [    2.001283] usbcore: registered new interface driver usbhid
> > [    2.001588] usbhid: USB HID core driver
> > [    2.002927] riscv-pmu-sbi: SBI PMU extension is available
> > [    2.004257] riscv-pmu-sbi: 16 firmware and 18 hardware counters
> > [    2.017615] NET: Registered PF_INET6 protocol family
> > [    2.032397] Segment Routing with IPv6
> > [    2.032878] In-situ OAM (IOAM) with IPv6
> > [    2.033574] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > [    2.037639] NET: Registered PF_PACKET protocol family
> > [    2.039420] bridge: filtering via arp/ip/ip6tables is no longer 
> > available by default. Update your scripts to load br_netfilter if you need 
> > this.
> > [    2.040579] 8021q: 802.1Q VLAN Support v1.8
> > [    2.043124] 9pnet: Installing 9P2000 support
> > [    2.043788] Key type dns_resolver registered
> > [    2.050694] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating 
> > architecture page table helpers
> > [    2.145175] EXT4-fs (vda2): mounted filesystem with ordered data mode. 
> > Quota mode: disabled.
> > [    2.146407] VFS: Mounted root (ext4 filesystem) readonly on device 254:2.
> > [    2.150622] devtmpfs: mounted
> > [    2.201842] Freeing unused kernel image (initmem) memory: 2204K
> > [    2.228413] Run /sbin/init as init process
> > [    2.242343] Run /etc/init as init process
> > [    2.243725] Run /bin/init as init process
> > [    2.244949] Run /bin/sh as init process
> > sh: cannot set terminal process group (-1): Inappropriate ioctl for device
> > sh: no job control in this shell
> > sh-5.1#
> > sh-5.1#
> > sh-5.1# QEMU: Terminated
> >
> >
> > Thank you.
> >
> > Regards
> > Vaibhav Vivek Deshpande
> >
> >
> >
> >
>
> 
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#58394): https://lists.yoctoproject.org/g/yocto/message/58394
Mute This Topic: https://lists.yoctoproject.org/mt/94368916/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to