This is may be better asked on the meta-xilinx list: https://lists.yoctoproject.org/listinfo/meta-xilinx
Philip On 10/17/2013 11:05 AM, Edward Vidal wrote: > Hello, > I got the following error. > DEBUG: Executing shell function do_compile > NOTE: make -C > /home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf > O=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/perf/1.0-r8/perf-1.0 > CROSS_COMPILE=arm-poky-linux-gnueabi- ARCH=arm > CC=arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork > -mfloat-abi=softfp -mfpu=neon > --sysroot=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7 > AR=arm-poky-linux-gnueabi-ar perfexecdir=/usr/lib/perf NO_GTK2=1 NO_DWARF=1 > prefix=/usr bindir=/usr/bin sharedir=/usr/share sysconfdir=/etc > perfexecdir=/usr/lib/perf/perf-core ETC_PERFCONFIG=../etc sharedir=share > mandir=share/man infodir=share/info all > CHK -fstack-protector-all > CHK -Wstack-protector > CHK -Wvolatile-register-var > CHK bionic > CHK libelf > CHK libdw > make: Entering directory > `/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf' > Makefile:554: No libdw.h found or old libdw.h found or elfutils is older > than 0.138, disables dwarf support. Please install new > elfutils-devel/libdw-dev > CHK libunwind > Makefile:570: No libunwind found, disabling post unwind support. Please > install libunwind-dev[el] >= 0.99 > I installed libunwind-devel-1.0.1-5.fc18.x86_64 > Is this a zedboard-zynq specific error? Is this an error in building the > kernel? > I did not see this when building for the beagleboard. I installed > libunwind-devel-1.0.1-5.fc18.x86_64 > I removed the package libunwind-devel-1.0.1-5.fc18.x86_64 since nothing > improved with the package installed. > I am in the process of running a clean build after all repository were > loaded in clean folder. > I appreciate any and all help. > Regards > > > On Wed, Oct 16, 2013 at 5:06 PM, Edward Vidal <[email protected]>wrote: > >> Hello Khem, >> Thanks for the help after modifying my local.conf >> MACHINE ?= "zedboard-zynq7" >> My build "MACHINE=zedboard-zynq7 bitbake core-image-sato" is in the >> process now 295 of 5076 tasks >> should take a short time to complete. >> regards >> >> >> >> On Wed, Oct 16, 2013 at 4:45 PM, Khem Raj <[email protected]> wrote: >> >>> >>> On Oct 16, 2013, at 2:57 PM, Edward Vidal <[email protected]> >>> wrote: >>> >>>> Hello, >>>> I built a zedboard core-image-sato on 09/21/13 with meta-xilinx at that >>> time I had the following folders. >>>> >>>> meta-kc705 >>>> meta-zc702 >>>> meta-zedboard >>>> >>>> Build Configuration: >>>> BB_VERSION = "1.19.1" >>>> BUILD_SYS = "x86_64-linux" >>>> NATIVELSBSTRING = "Fedora-18" >>>> TARGET_SYS = "arm-poky-linux-gnueabi" >>>> MACHINE = "zedboard" >>>> DISTRO = "poky" >>>> DISTRO_VERSION = "1.4+snapshot-20130921" >>>> TUNE_FEATURES = " armv7a vfp neon zynq" >>>> TARGET_FPU = "vfp-neon" >>>> meta >>>> meta-yocto = >>> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" >>>> meta-xilinx >>>> meta-kc705 >>>> meta-zc702 >>>> meta-zedboard = "master:46f4c79d6d55b556a90bb0fd89c2c09acf2aebff" >>>> meta-yocto-bsp = >>> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" >>>> >>>> With the dora release I did a new clone of git:// >>> git.yoctoproject.org/meta-xilinx >>>> now I do not see >>>> meta-kc705 >>>> meta-zc702 >>>> meta-zedboard >>>> >>>> When I execute MACHINE=zedboard bitbake core-image-sato >>>> ERROR: OE-core's config sanity checker detected a potential >>> misconfiguration. >>>> Either fix the cause of this error or at your own risk disable the >>> checker (see sanity.conf). >>>> Following is the list of potential problems / advisories: >>>> >>>> Please set a valid MACHINE in your local.conf or environment >>>> >>>> ERROR: Execution of event handler 'check_sanity_eventhandler' failed >>>> In my local.conf I have the following. >>>> >>>> MACHINE ?= "zedboard" >>>> >>>> bblayers.conf >>>> # LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf >>>> # changes incompatibly >>>> LCONF_VERSION = "6" >>>> >>>> BBPATH = "${TOPDIR}" >>>> BBFILES ?= "" >>>> >>>> BBLAYERS ?= " \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta-xilinx \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta-yocto-bsp \ >>>> " >>>> BBLAYERS_NON_REMOVABLE ?= " \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta \ >>>> /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ >>>> " >>>> Any help will be appreciated. >>>> Regards >>> >>> it seems like layer went thru some restructuring e.g. see >>> commit d9617006376d73e37f1db17857ee06c24e6b7c03 >>> Author: Nathan Rossi <[email protected]> >>> Date: Fri Aug 2 12:41:14 2013 +1000 >>> >>> meta-*: Remove deprecated sublayers >>> >>> * The machines supported in the sublayer BSPs are now supported in >>> the base >>> meta-xilinx layer, these sublayers are no longer required. >>> * Relevant documentation has also been relocated into >>> meta-xilinx/docs/*. >>> >>> >>> >>> So may be zedboard -> zedboard-zynq7 >>> >>> >>>> >>>> _______________________________________________ >>>> yocto mailing list >>>> [email protected] >>>> https://lists.yoctoproject.org/listinfo/yocto >>> >>> >> > > > > _______________________________________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/yocto > _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
