On Oct 17, 2013, at 8:05 AM, Edward Vidal <[email protected]> wrote:
> Hello, > I got the following error. > DEBUG: Executing shell function do_compile > NOTE: make -C > /home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf > > O=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/perf/1.0-r8/perf-1.0 > CROSS_COMPILE=arm-poky-linux-gnueabi- ARCH=arm CC=arm-poky-linux-gnueabi-gcc > -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon > --sysroot=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7 > AR=arm-poky-linux-gnueabi-ar perfexecdir=/usr/lib/perf NO_GTK2=1 NO_DWARF=1 > prefix=/usr bindir=/usr/bin sharedir=/usr/share sysconfdir=/etc > perfexecdir=/usr/lib/perf/perf-core ETC_PERFCONFIG=../etc sharedir=share > mandir=share/man infodir=share/info all > CHK -fstack-protector-all > CHK -Wstack-protector > CHK -Wvolatile-register-var > CHK bionic > CHK libelf > CHK libdw > make: Entering directory > `/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf' > Makefile:554: No libdw.h found or old libdw.h found or elfutils is older than > 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev > CHK libunwind > Makefile:570: No libunwind found, disabling post unwind support. Please > install libunwind-dev[el] >= 0.99 > I installed libunwind-devel-1.0.1-5.fc18.x86_64 > Is this a zedboard-zynq specific error? Is this an error in building the > kernel? > I did not see this when building for the beagleboard. I installed > libunwind-devel-1.0.1-5.fc18.x86_64 > I removed the package libunwind-devel-1.0.1-5.fc18.x86_64 since nothing > improved with the package installed. You were barking up the wrong tree :) The problem is missing dependency for target package not for host package. whichever package is failing, add elfutils to DEPENDS section of the recipe and it should fix it. > I am in the process of running a clean build after all repository were > loaded in clean folder. > I appreciate any and all help. > Regards > > > On Wed, Oct 16, 2013 at 5:06 PM, Edward Vidal <[email protected]> > wrote: > Hello Khem, > Thanks for the help after modifying my local.conf > MACHINE ?= "zedboard-zynq7" > My build "MACHINE=zedboard-zynq7 bitbake core-image-sato" is in the process > now 295 of 5076 tasks > should take a short time to complete. > regards > > > > On Wed, Oct 16, 2013 at 4:45 PM, Khem Raj <[email protected]> wrote: > > On Oct 16, 2013, at 2:57 PM, Edward Vidal <[email protected]> wrote: > > > Hello, > > I built a zedboard core-image-sato on 09/21/13 with meta-xilinx at that > > time I had the following folders. > > > > meta-kc705 > > meta-zc702 > > meta-zedboard > > > > Build Configuration: > > BB_VERSION = "1.19.1" > > BUILD_SYS = "x86_64-linux" > > NATIVELSBSTRING = "Fedora-18" > > TARGET_SYS = "arm-poky-linux-gnueabi" > > MACHINE = "zedboard" > > DISTRO = "poky" > > DISTRO_VERSION = "1.4+snapshot-20130921" > > TUNE_FEATURES = " armv7a vfp neon zynq" > > TARGET_FPU = "vfp-neon" > > meta > > meta-yocto = "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" > > meta-xilinx > > meta-kc705 > > meta-zc702 > > meta-zedboard = "master:46f4c79d6d55b556a90bb0fd89c2c09acf2aebff" > > meta-yocto-bsp = "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840" > > > > With the dora release I did a new clone of > > git://git.yoctoproject.org/meta-xilinx > > now I do not see > > meta-kc705 > > meta-zc702 > > meta-zedboard > > > > When I execute MACHINE=zedboard bitbake core-image-sato > > ERROR: OE-core's config sanity checker detected a potential > > misconfiguration. > > Either fix the cause of this error or at your own risk disable the > > checker (see sanity.conf). > > Following is the list of potential problems / advisories: > > > > Please set a valid MACHINE in your local.conf or environment > > > > ERROR: Execution of event handler 'check_sanity_eventhandler' failed > > In my local.conf I have the following. > > > > MACHINE ?= "zedboard" > > > > bblayers.conf > > # LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf > > # changes incompatibly > > LCONF_VERSION = "6" > > > > BBPATH = "${TOPDIR}" > > BBFILES ?= "" > > > > BBLAYERS ?= " \ > > /home/vidal/POKY/build101613_zedboard/poky/meta \ > > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ > > /home/vidal/POKY/build101613_zedboard/poky/meta-xilinx \ > > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto-bsp \ > > " > > BBLAYERS_NON_REMOVABLE ?= " \ > > /home/vidal/POKY/build101613_zedboard/poky/meta \ > > /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \ > > " > > Any help will be appreciated. > > Regards > > it seems like layer went thru some restructuring e.g. see > commit d9617006376d73e37f1db17857ee06c24e6b7c03 > Author: Nathan Rossi <[email protected]> > Date: Fri Aug 2 12:41:14 2013 +1000 > > meta-*: Remove deprecated sublayers > > * The machines supported in the sublayer BSPs are now supported in the > base > meta-xilinx layer, these sublayers are no longer required. > * Relevant documentation has also been relocated into meta-xilinx/docs/*. > > > > So may be zedboard -> zedboard-zynq7 > > > > > > _______________________________________________ > > yocto mailing list > > [email protected] > > https://lists.yoctoproject.org/listinfo/yocto > > > _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
